1961H67

Thanks for All the Likes! That truck he’s in is the LTH I bought last summer, I should have mentioned that in the picture, probably take it to a few shows,, I would love to have him in the LJ that far along this time next year!

My Helper says he’s ready for the Summer Shows ,, just a few more inches and he’s going to reach them pedals !

Rainy Saturday, hopefully I can get motivated and get some stuff done on the floor, I have made a lot of progress over the winter ( as I did last winter) I hope i can keep moving forward through the summer,, My calendar is already starting to fill,, My Number One helper has his first little league baseball game Thursday, Truck and Train show at the NC Transportation Museum May 20 , Spencer , NC , I’m hoping to take the LTH . And then like everywhere else,,, which is great,, a Car Show every Saturday that’s hard to turn down. Equipment hauling usually picks up through the summer ( Which is good, it supports the TOY funds,lol ) And probably most of all distractions from The LJ is Grass mowing and weed eating ! But no complaints I’m Blessed to be able to keep doing it. I’m looking forward to seeing All the trucks on this site at a show someday,, we have all seen a lot of progress and a lot of hard work!

Thank You for sharing. And thank you for sharing the photos, I’m very sorry for your loss.

Great story,, I have often wondered how you got the knowledge to use the machines you have in your shop. There is a guy locally here in his late 50s that has a machine shop, I’ll get him to make a pin or press a bushing , surface a flywheel from time to time, he has a ton on lathes and equipment, he can’t find any one that wants to learn the trade, I’m sure when he retires it will be closed down.

I got my LJ (gas) parts truck from some house movers, I’ve watched them, it takes days to block, crib and brace all that stuff, lots of hard work for sure. There Grandpa bought the LJ new in 48 , one picture I have didn’t go well, the axle on a old army truck broke, started going backwards down a hill and jackknifed, the house fell off, not sure what the LJ was doing, maybe trying to tow it . The other picture is more classic!

I got a few minutes to work on the floor yesterday, I still have a little trimming, but I think it’s going to be ok .

That’s the most Detailed Tractor I’ve ever seen! A few years ago I saw a guy bring a few of those size tractors to a local show,, he had went far and beyond that Flathead Ford kit,, he had a 302 Ford in one and a Chevy V8 in a 30 Ferguson the best I can remember,, All very nice.

Sweet ! I Love watching your H Model progress! That’s the FIRST truck from my childhood,, no matter how many Ls, Bs, Rs , Super Liners I see,, The H still makes me feel like a little kid!

Sorry to hear about the trouble with the crankshaft,, I went through the same issue with a 3406 , Its the same EVERYWHERE,,I’ve gotten myself in the same situation that Mr Rockwell did, I have been asked about a Machine shop that once was top notch and the older guys have sold out and the quality is not as good. It’s a Dying trade ! I’m glad you found a good shop. ( My wife wasn’t happy about driving through Boston in a Honda after our visit with you, I’ll tell her you made it in a B Model)

The Flathead V8s are a nice touch! Lol on the Trucking Business,, My Dad used to give advice on Trucking, He would say “ The way to make a Small fortune in the Trucking Business is to Start with a Big One “ !

Hopefully I can get back to my floor in a week or so,, my old wood is 1/2 inch, I picked up a 2 foot x 4 foot piece of 1/2 plywood, I’m going to cut it out and try it, I think it will lay flush, then I can put sound deader on the bottom, I might be able to use 5/8 , the foot valve base bolts to it so it needs to be close to original. I’ll experiment with the 1/2 and see how it goes, ready to get the inside done and move on to the rest of the body work.

O yeah we’re going to get back to the LJ ,, got more parts now,, Just a matter of time before we throw some more Coca Cola yellow on this baby!

Took a few days off from the LJ ,, Came down to a huge car,truck show/ swap meet in Myrtle Beach SC , 100s of parts vendors, I stocked up on sandpaper, wire , wire loom etc…. . I’ve attended this event about 10 years in a row, brought my IHC Scout down for the past 6 or 7 ,,, For the past few years seems I end up buying mostly stuff to work on the LJ Mack ,, Lots of great ideas from fuse boxes to weather stripping ,,,, well back to work Monday.

It’s a must for restoring, cleaning on engines ,, get a kit, it has a lot of attachments , wire brush’s , grinding stones, cutting wheels.

I need the same, so if you find them let me know,, I haven’t asked anyone about them yet. One of my parts trucks has a perfect clutch pad on it but it’s so old it will fall apart if I tried to pry it off.

Great tips! I do like the wood, it does have a good solid feel to it. Thanks for the ideas.

I can’t tell what the old ones are, ( it would be nice to know what Mack used back then and years before, just for the history on their choices of wood vs Metal. )

Yeah you see several different floors in them, I’m sure you’re correct on years of u joint grease and trans oil soaking it up like a lamp wick. I have no clue what wood Mack used, looks like plywood, that’s what I’m using to replace it (1/2 inch) .

One of my parts trucks has the floor replaced with metal, this one still has the original wood, but in bad shape where the accelerator pedal and foot pedal bolts down , and it’s soaked with oil from underneath, I have no idea how it got so oily, I steamed cleaned both them and it’s like brake shoes,, just keeps bleeding out.

Got started on my woodworking skills today, I guess we’ll see how this turns out.

Just in time hopefully for warmer weather, it will go quickly when you get all your parts laid out to install in that refurbished block!

I know where a Giant and a Raider is but I’m not by that way often, about 50 miles from me. I stopped and looked at the Raider about 2 years ago, it was all there, Cummins, 13 speed. He wanted $5000 for it, I thought about buying, but I have too many projects already! If I’m out that way I’ll measure them.

Just saw this on eBay,, still available! I’ve got to many Hobbies/ Projects, if someone has a HO collection it would be a cool addition, I don’t think it’s complete , probably worth $40 for parts.