Mackman686 Posted December 27, 2023 Share Posted December 27, 2023 Hi All, Merry Christmas and a Happy New Year from New Zealand. I'm going to replace the bushes on my 34K Camelback during the Christmas holidays and I'm wondering if any one had the torque setting for the U bolts? Ive been looking everywhere and cant find anything. Kind Regards Keegan Hewlett Quote Link to comment Share on other sites More sharing options...
mrsmackpaul Posted December 27, 2023 Share Posted December 27, 2023 I don't know but someone will be qlong soon enough Paul 1 Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted December 27, 2023 Share Posted December 27, 2023 2 Quote Link to comment Share on other sites More sharing options...
mechohaulic Posted December 28, 2023 Share Posted December 28, 2023 old school rule of thumb was :: as tight as you can get them. depended on what you have for tools ' air or manual also. such a technical world today. the follow up retorque was the important part for most. did the replacement of cutting edges on a D-8 dozer in hot blazing sun one Sunday afternoon ; was the concern over torque =He-- no ; tighten them there bolts. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post kscarbel2 Posted December 28, 2023 Popular Post Share Posted December 28, 2023 Apply 20wt non-detergent motor oil to the (rubber) trunnion insulators at installation. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.