Jump to content

1971 Mack Gear Pattern


amhst56

Recommended Posts

I bought some land and digging out a pond. a friend of mine let me use his 1971 mack pickup. it hadn't been ran in 5 years but with 2 new batteries it started right up. it works good but we can't seem to get it in reverse. he said that it was all the way left and away from you (or down). i tried it for about 45 minutes today and it doesn't seem like it's there. i tried to the left and back, to the right and forward, and to the right and back and can't seem to find a reverse anywhere.

does anyone know where reverse is or if it is to the left and down, does anyone know of a trick to get it in reverse?

the only other thing i know about the truck is that the motor is under the cab so the front end is flat and there is about 4 feet from the cab to the dump truck. i think he said it was a 5 ton dump

any help would be greatly appreciated!!!

Link to comment
Share on other sites

Mack pick up??? last one built was back some 50 years ago?

is this a Mack cabover? if so we need to know what trans it has? some trucks back then had 2 sticks and the 2nd stick had the reverse hole

Trent 

:MackLogo:

Find the DOOR TAG and read it to us. That way we know what you have.

Since you didn't mention it had TWO sticks...I'd assume it has single.

IMG-20180116-202556-655.jpg

Larry

1959 B61 Liv'n Large......................

Charter member of the "MACK PACK"

 

Link to comment
Share on other sites

I bought some land and digging out a pond. a friend of mine let me use his 1971 mack pickup. it hadn't been ran in 5 years but with 2 new batteries it started right up. it works good but we can't seem to get it in reverse. he said that it was all the way left and away from you (or down). i tried it for about 45 minutes today and it doesn't seem like it's there. i tried to the left and back, to the right and forward, and to the right and back and can't seem to find a reverse anywhere.

does anyone know where reverse is or if it is to the left and down, does anyone know of a trick to get it in reverse?

the only other thing i know about the truck is that the motor is under the cab so the front end is flat and there is about 4 feet from the cab to the dump truck. i think he said it was a 5 ton dump

any help would be greatly appreciated!!!

if it's a pickup it must be a column shift. i think your trying to shift the E-brake. :pat::pat::pat:

and remember

"PREFORMANCE COUNTS"

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...