Jump to content

Dodge Market News


kscarbel2

Recommended Posts

FCA to recall 862,520 vehicles that don't meet U.S. emissions standards

David Shepardson, Reuters  /  March 13, 2019

Fiat Chrysler Automobiles NV will recall 862,520 gasoline-powered vehicles in the United States that do not meet emissions standards, the EPA said on Wednesday.

The recall was prompted by in-use emissions investigations conducted by the EPA and testing conducted by Fiat Chrysler as required by EPA regulations, the agency said. The EPA said it will continue to investigate other Fiat Chrysler vehicles that are potentially non-compliant and may become the subject of future recalls.

“EPA welcomes the action by Fiat Chrysler to voluntarily recall its vehicles that do not meet U.S. emissions standards,” EPA Administrator Andrew Wheeler said in a statement. “We will provide assistance to consumers navigating the recall and continue to ensure that auto manufacturers abide by our nation’s laws designed to protect human health and the environment.”

The recall includes the 2011-2016 Dodge Journeys, 2011-2014 Chrysler 200s and Dodge Avengers and 2011-2012 Dodge Calibers.

FCA said another 103,221 vehicles are being recalled in Canada for the same reason. 

Not a safety issue

Fiat Chrysler said in a statement the EPA announcement "has no safety implications. Nor are there any associated fines."

"The issue was discovered by FCA during routine in-use emissions testing and reported to the agency," the company said. "We began contacting affected customers last month to advise them of the needed repairs, which will be provided at no charge."

The EPA said vehicle owners "will receive notification from FCA when parts are available for them to bring their vehicle in to be repaired. In the meantime, owners can continue to drive their vehicles."

"Due to the large number of vehicles involved and the need to supply replacement components -- specifically to the vehicle’s catalytic converter --  this recall will be implemented in phases during the 2019 calendar year beginning with the oldest vehicles first," the EPA said in its statement.

In January, Fiat Chrysler agreed to a settlement worth about $800 million to resolve claims by the U.S. Justice Department and state of California that it used illegal software to produce false results on diesel-emissions tests. It is awaiting the outcome of a criminal probe.

The hefty penalty was the latest fallout from the U.S. government's stepped-up enforcement of vehicle emissions rules after Volkswagen Group admitted in September 2015 to intentionally evading emissions rules.

Link to comment
Share on other sites

Noose hanging at Ram plant adds to industry tensions

Gabrielle Coppola, Bloomberg  /  March 19, 2019

Fiat Chrysler workers discovered a noose hanging in a Ram truck plant in Michigan late last month, prompting a second investigation into racism at a factory already simmering with tension.

The company brought outside investigators into its Sterling Heights assembly plant to look into who hung the noose, commonly understood to be a threat of violence against African Americans, but hasn’t found the culprit.

“If and when that person is identified, their relationship with the company will be terminated,” the automaker said. “This type of behavior will simply not be tolerated.”

It’s the second internal investigation into racist harassment at the assembly plant north of Detroit since late 2017, according to people with knowledge of the events, and the latest in a series of racist incidents alleged at U.S. auto plants. At a UAW convention in Detroit last week, union members passed a set of resolutions that acknowledged “much more work to do” to secure protections against discrimination in the workplace.

“A rise in recent years of incidents targeting people based on their race, gender, immigration status, or religious beliefs is impossible to ignore and requires an aggressive response,” the resolution stated. General Motors faces allegations of racial harassment at a plant in Toledo, Ohio, while Ford has settled claims at a Chicago factory.

Fiat Chrysler workers at the Sterling Heights facility first reported ropes that looked like nooses hanging in the factory in late 2017, as the automaker started preparations for its new pickup, according to people familiar with the events, who asked not to be identified because they weren’t authorized to speak.

The company investigated and determined there was no malicious or racist intent, but together with the UAW agreed that workers wouldn’t leave knotted ropes hanging to avoid any further offense or misunderstanding.

Paint shop

Workers reported finding another noose between 1 a.m. and 3:30 a.m. local time on Feb. 22 in the paint shop at the Sterling Heights assembly plant, commonly called SHAP. The next day, on a Facebook page for UAW Local 1700, which represents workers at the factory, an anonymous post was shared alluding to “several disturbing incidents” at the plant in the last few months, including one as recently as that week.

“We must speak up and speak out when we are aware of heinous discriminatory acts being committed by co-workers,” the post reads. “Fear-mongering through race based attacks and antics should not and will NOT BE TOLERATED AT SHAP.”

The people with knowledge of the noose incidents said tensions have risen at the Sterling Heights plant since headcount ballooned to more than 7,000 hourly workers, from about 3,000, after the company overhauled the factory to make pickups instead of Chrysler and Dodge sedans.

A large portion of the new workers were transfers from a nearby Fiat Chrysler facility in Warren, Mich.. This influx has triggered conflicts over job placements and seniority, the people said.

A separate noose incident took place at another Fiat Chrysler factory last year. A subcontractor fired one of its employees at the automaker’s Toledo Jeep plant in June for hanging one, a Fiat Chrysler spokeswoman said, confirming an earlier report by The Toledo Blade newspaper.

Fiat Chrysler said it will continue to conduct training to “underscore the value of diversity and inclusion.”

Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

Ram engine supplier Cummins will probe emissions certifications

Bloomberg  /  April 30, 2019

Cummins Inc., a key supplier of engines for Fiat Chrysler's Ram pickups, has started a review of how it certifies the emissions of engines it supplies to the carmaker.

Cummins will check certification and compliance processes for engines in the 2019 Ram 2500 and 3500 trucks after conversations with the U.S. Environmental Protection Agency and the California Air Resources Board (CARB), the company said in a statement posted Monday.

“We are reviewing our certification process and it’s too early to tell what, if any actions, would or might be needed,” Jon Mills, a Cummins spokesman, said in an email.

Fiat Chrysler Automobiles said it welcomed the review and said it would cooperate as necessary, adding the discussions are taking place between Cummins and other stakeholders.

The carmaker in January agreed to pay about $800 million in fines and costs to settle lawsuits brought by states, car owners and the U.S. Justice Department, which said earlier versions of the company’s diesel-powered pickups and SUVs violated clean-air rules. Last week, the Justice Department opened a criminal investigation into Ford Motor Co.’s emissions certification process, intensifying an issue the automaker disclosed two months ago.

Ford is at least the third major automaker to face a U.S. federal investigation over emissions in the span of a few years. Volkswagen Group paid a $4.3 billion penalty in 2017 after installing so-called defeat devices in its diesel engines to bypass emissions tests.

FCA debuted revamped versions of its heavy-duty Ram pickups at the Detroit auto show in January and started sales in the second quarter.

“We do not comment on ongoing investigations,” the EPA said, without specifying if the agency had started a formal probe of Cummins.

Link to comment
Share on other sites

FCA seeks $160 million in tax incentives for Detroit plants

Automotive News  /  April 30, 2019

Fiat Chrysler Automobiles is seeking up to $160 million in taxpayer incentives to partially subsidize a planned $2.5 billion investment in two Detroit assembly plants.

The package of taxpayer incentives, grants and breaks would come from an Industrial Property Tax Abatement, the Good Jobs for Michigan program, a State Essential Services Assessment Exemption and a Michigan Business Development Program grant from the Michigan Strategic Fund, according to documents submitted this week to the Detroit City Council.

FCA's plans to spend $1.6 billion converting its Mack Avenue engine plants into a Jeep assembly plant and $900 million retooling and modernizing the company's nearby Jefferson North Assembly Plant will add 4,950 jobs and is expected to result in a "gross fiscal benefit" of $300 million, according to the Detroit Economic Growth Corp.

"FCA confirms that it has applied for up to $160 million from existing state incentive programs as related to its proposed development at the Mack Avenue Engine Complex and Jefferson North Assembly Plant," an FCA spokeswoman said Tuesday. "As these incentives have yet to be approved and negotiations are still pending, we cannot comment further."

If approved by state economic development officials, the tax incentives would amount to 6.4 percent of the automaker's total investment at the two east side Detroit plants.

By comparison, Ford Motor Co. received $239 million in tax incentives over 30 years for a planned $740 million autonomous vehicle campus in Detroit's Corktown neighborhood, anchored by the long-vacant Michigan Central Station train depot. If that ambitious project comes to fruition, Ford's incentives will amount to 32.3 percent of its investment.

The disclosure of FCA's potential tax incentives comes three days after the city's self-imposed deadline to assemble 200 acres for FCA's plant expansion, which could add millions of dollars to the value of the subsidies for the automaker to expand its manufacturing footprint in the Motor City.

The potential tax incentives for Fiat Chrysler would need approval by the Michigan Strategic Fund's board.

A spokesman for the Michigan Economic Development Corp. would not confirm the $160 million figure.

"At this time, FCA and the MEDC are still finalizing the incentive package that will go before the MSF board," MEDC spokesman Otie McKinley said in an email. " As is always our process the MEDC does not share project details until time of MSF board approval."

No date has been set for the MSF board to consider tax incentives for the automaker, McKinley said.

Detroit Mayor Mike Duggan's administration has committed to building a wall along the the new property line with abutting homes on Beniteau Street as part of a $17.4 million contribution to a community benefits agreement that is pending before City Council.

John Roach, spokesman for Duggan, said the mayor's office was "making significant progress" on the land deals and there will be "an announcement when everything is done."

Detroit's efforts to assemble public and private land around the two FCA plants is said to be a complicated matter involving a series of land swaps to lower the city's out-of-pocket costs. DTE Energy Co., the Great Lakes Water Authority and Hantz Farms have already publicly agreed to land deals with the city. City Council approved those land swaps Tuesday on a 7-2 vote, The Detroit News reported.

One of the biggest landowners with which Duggan's team has been negotiating is Crown Enterprises, the real estate development arm of billionaire trucking mogul Manuel "Matty" Moroun's family business. The Morouns own an 80-acre paved parking lot that they lease to FCA for finished vehicle storage. It's the site of the former Budd Wheel plant, which Crown Enterprises demolished in 2017 to build a logistics and vehicle shipping center for FCA.

On Friday, the Michigan Department of Environment, Great Lakes and Energy's Air Quality Division approved FCA's air pollution-control permit for expansion of the Mack Avenue plant.

Link to comment
Share on other sites

  • 4 weeks later...

Fiat Chrysler puts merger offer to Renault board

Reuters-Bloomberg  /  May 27, 2019

PARIS -- Fiat Chrysler Automobiles has made a "transformative merger" proposal to French peer Renault, FCA said on Monday.

The deal would create an automaker with a strong presence across key regions, automotive markets and technologies, generating 5 billion euros ($5.6 billion) in annual savings, FCA said in a statement.

The "broad and complementary brand portfolio would provide full market coverage, from luxury to mainstream," FCA said.

Renault said in a statement Monday that its board had reviewed FCA's "friendly proposal" and had decided to "study with interest" the opportunity of such a business combination.

The merger would bring FCA's brands such as Jeep, Chrysler, Alfa Romeo and Fiat under a common umbrella with Renault Group's Renault, Dacia and Lada brands.

"The case for combination is also strengthened by the need to take bold decisions to capture at scale the opportunities created by the transformation of the auto industry," FCA said.

The deal could take more than a year to finalize, FCA CEO Mike Manley told employees on Monday in a letter.

The transaction will be structured as a 50-50 ownership through a Dutch holding company, FCA said, adding that it would give Renault investors an implied premium of about 10 percent. After payment of a 2.5 billion-euro ($2.8 billion) special dividend to FCA shareholders, each group would receive 50 percent of the combined entity in new stock.

Exor, Fiat's founding Agnelli family holding, is set to become the single largest shareholder in the combined entity. The new company would be chaired by John Elkann, head of the Agnelli family that controls 29 percent of FCA, sources familiar with the deal talks told Reuters. Renault Chairman Jean-Dominique Senard would likely become CEO, one said.

Renault and FCA had a combined market value of 32.6 billion euros ($36.5 billion) as of Friday. Milan-listed Fiat Chrysler shares jumped 19 percent in early trading, while Renault stock gained 17 percent.

Renault and FCA built about 8.7 million cars last year, which would vault the pair past Hyundai Motor Group and General Motors. That’s still behind the world’s two biggest automakers, Volkswagen Group and Toyota Motor Corp., which both topped 10 million vehicles last year. Renault’s existing alliance, including numbers from partners Nissan and Mitsubishi, also reached this milestone.

The merger would give Renault access to the North American market, while FCA would gain clout in Russia, the French carmaker’s second-biggest market with its AvtoVaz unit, which builds Ladas.

National politics

The merger plan faces political and workforce hurdles in Italy, and potentially also in France. Most of FCA's European plants are running below 50 percent capacity. FCA said the planned cost savings would not depend on factory closures.

Pressure for consolidation among automakers has grown with the challenges posed by electrification, tightening emissions regulations and expensive new technologies being developed for connected and autonomous vehicles.

“Fiat and Renault are looking for surer footing by gaining scale, and that’s not a bad idea for mass-market carmakers,” Bankhaus Metzler analyst Juergen Pieper said. “The execution of the deal is a significant hurdle. But on paper, this proposal looks good.”

If successful, the tie-up could also have profound repercussions for Renault's 20-year-old alliance with Nissan, already weakened by the crisis surrounding the arrest and ouster of former Chairman Carlos Ghosn late last year.

FCA and Renault have moved ahead without Nissan, the French automaker’s 20-year partner, which has resisted proposals by Renault to merge in a holding-company structure.

Leadership changes

Both FCA and Renault went through dramatic changes at the top last year after former FCA chief, Sergio Marchionne, died and Ghosn was arrested in Tokyo on charges of financial crimes.

FCA-Renault, like almost every possible automotive pairing, had been studied intermittently for years by dealmakers. But the fractious relations between Ghosn and Marchionne made constructive merger talks impossible until after Marchionne's sudden death last July, banking sources said.

The French government, Renault's biggest shareholder with a 15 percent stake, supports the merger in principle but will need to see more details, its main spokeswoman said on Monday.

France will be "particularly vigilant regarding employment and industrial footprint," another Paris official said, adding that any deal must safeguard Renault's alliance with Nissan.

Nissan, which is 43.4 percent-owned by Renault, would be invited to nominate a director to the 11-member board of the new combined company, under the plan presented on Monday.

As alliance partners, Nissan and its affiliate Mitsubishi would benefit from an estimated 1 billion euros ($1.12 billion) in annual savings from the merger, FCA said.

The Italian government may also seek a stake in the combined group to balance France's holding, a lawmaker from the ruling League party said on Monday.

Anticipating such sensitivities, FCA stressed "new opportunities for employees of both companies" under the merger.

Link to comment
Share on other sites

  • 2 weeks later...

Sales chief Bigland files whistleblower suit against FCA

Vince Bond Jr. & Michael Wayland, Automotive News  /  June 5, 2019

Reid Bigland, head of U.S. sales for Fiat Chrysler Automobiles (FCA), filed a whistleblower lawsuit against the automaker Wednesday, claiming he has been a scapegoat for the company's sales practices being probed by federal officials.

In the suit, Bigland claims FCA has retaliated against him for cooperating with an Securities and Exchange Commission (SEC) investigation and slashed his pay by about 90 percent, starting in March. FCA executives plan to use his withheld compensation to pay any penalties or settlements reached with the SEC, according to the lawsuit filed in Michigan's Oakland County Circuit Court.

The automaker's actions will cost Bigland about $1.8 million, the lawsuit said.

Bigland, according to the suit, says he has cooperated with the SEC investigation, testifying "at length" about Fiat Chrysler's U.S. sales reporting practices, which he said long predated his appointment as U.S. sales chief in 2011, according to the lawsuit.

"In late 2018, presumably as a way to wrap up their investigation with some result, the SEC suggested to plaintiff that he admit to some wrongdoing as to defendants' monthly sales reporting," Deborah Gordon, Bigland's lawyer, wrote in the lawsuit. "The SEC also suggested a resolution involving some penalty to FCA. Because (Bigland) had not engaged in any wrongdoing, and there was no wrongdoing, he declined to do so."

In July 2016, FCA voluntarily changed the way it reports U.S. monthly sales and restated results for the previous five years to reflect the new methodology. The lawsuit says Bigland was excluded from the process of devising a new monthly sales reporting methodology, and was only advised that FCA was considering different methods to adopt.

The SEC has been investigating the company's sales reporting practices before the company changed them.

Fiat Chrysler said long-term incentive payouts are made at the discretion of a board committee.

Bigland's "eligibility for incentive compensation — like that of all corporate officers — is subject to a determination by the board of directors' compensation committee that he has satisfied the applicable company and personal performance conditions," FCA said in a statement. "Mr. Bigland's eligibility for his award remains subject to that determination and completion of a board-level evaluation of issues that are the subject to governmental investigations (as previously disclosed by FCA) in which FCA continues to cooperate."

The company said further it would be "inappropriate to comment on ongoing litigation or internal compensation processes."

According to Gordon, Bigland remains employed by the company. 

Bigland’s participation in the SEC investigation, including a “white paper” he wrote detailing his knowledge of the automaker’s sales reporting methodology, has sparked retaliation from the company, Gordon said.

She described FCA’s decision to withhold a portion of his compensation as an “unusual situation” because of Bigland’s “excellent” performance that the lawsuit aims to reconcile.

“We’re hoping my client will receive the compensation he has earned and then some,” Gordon said Wednesday. “It appears my client is being retaliated against.”

.

Photo 4a.jpg

Link to comment
Share on other sites

Fiat Chrysler withdraws Renault merger offer

Bloomberg & Reuters  /  June 5, 2019

PARIS -- Fiat Chrysler withdrew a $35 billion merger offer for France's Renault, abruptly calling off what would have been a landmark deal to create the world's third-biggest automaker.

Renault directors failed to reach a verdict on FCA's May 27 merger proposal at a board meeting that ran late Wednesday, the company said. The board was "unable to take a decision due to the request expressed by the representatives of the French state to postpone the vote to a later meeting," Renault said in a statement.

Fiat Chrysler pulled the merger offer for Renault after the French automaker’s Japanese partner, Nissan Motor Co., declined to support the deal, The Wall Street Journal reported late Wednesday, citing people familiar with the matter.

Nissan’s two representatives on Renault’s board were withholding support as other board members prepared to vote in favor of the $35 billion merger, the paper said. The opposition from Nissan representatives raised doubts about the Japanese automaker's commitment to preserving the alliance if the merger were to proceed, the paper said.

"FCA remains firmly convinced of the compelling, transformational rationale of a proposal that has been widely appreciated since it was submitted, the structure and terms of which were carefully balanced to deliver substantial benefits to all parties," the company said in a statement. "However it has become clear that the political conditions in France do not currently exist for such a combination to proceed successfully."

The French government, a major Renault shareholder, said Wednesday it wouldn’t approve Fiat Chrysler’s merger proposal without Nissan’s guarantee that Renault’s alliance with Nissan would survive. The French government asked to delay a vote on the merger, prompting Fiat Chrysler to withdraw its merger proposal, The Wall Street Journal said, citing people close to the matter.

France was making progress toward a deal that would meet its demands, most of which were granted by Fiat, according to a French official who asked not to be named.

However, French officials wanted more time to secure other requests, including that Nissan come on board before a combination move forward. More time was needed to reassure the Japanese side and explain the deal, a source told Bloomberg, adding the French government was surprised that Fiat suddenly withdrew its offer.

On Monday, Nissan CEO Hiroto Saikawa said that the proposed merger, if realized, would significantly alter the structure of Renault.

“This would require a fundamental review of the existing relationship between Nissan and Renault,” Saikawa said.

FCA had earlier reached a tentative agreement with France on the terms of the proposed merger with Renault, two sources told Reuters.

French concerns

The French state, which owns 15 percent of Renault, had been seeking more influence over the merged company, firmer job guarantees and improved terms for Renault shareholders in return for blessing the $35 billion tie-up.

Renault, FCA and the French government all declined to comment earlier on the ongoing board discussions. 

Analysts had warned of complications with the deal, including Renault's existing alliance with Nissan, the French state's role as Renault's largest shareholder and potential opposition from politicians and workers to any cutbacks.

FCA has been locked in talks with Renault and the French state over its bid to create the world's third-biggest carmaker. France had broadly welcomed the deal, on condition it guarantees Renault's domestic blue-collar jobs and plants.

Leadership questions

The collapse of his proposal to create the world’s third-largest automaker marks a significant retreat for FCA Chairman John Elkann, who leads the company’s founding Agnelli family. After discussions with Renault’s cross-town rival Groupe PSA, Elkann opted for the riskier path, proceeding with an offer for Renault despite the complications of the government’s role and its strained relationship with alliance partner Nissan.

The breakdown of talks on a night when a deal appeared to be in hand also leaves Renault Chairman Jean-Dominique Senard in a difficult position -- having sought and failed to bring the French carmaker’s various constituencies into agreement. In addition to the demands from the French state, unions were worried about jobs and Nissan felt burned by the previous regime under deposed alliance Chairman Carlos Ghosn.

Renault’s board was poised to approve the deal, with Nissan representatives abstaining, people familiar with the matter told Bloomberg. But France’s representatives asked for more time after officials made clear they wanted to discuss with Japanese authorities before making a decision, they said. Finance minister Bruno Le Maire plans a trip to Japan soon, one of the people told Bloomberg.

More time was needed to reassure the Japanese side and explain the deal, a French government official said, asking not to be identified to comply with ground rules. The person added that the government found surprising Fiat’s rushed move to withdraw its offer.

A spokesman for the minister didn’t return requests for comment.

Criticism of Fiat’s May 27 proposal has gathered steam in recent days. France asked for assurances on jobs, board representation and the role of Senard, 66, who would be CEO of the combined company.

Some investors have also voiced doubts. Paris-based activist investment manager CIAM, in a letter to Renault’s board, said the merger with Fiat significantly undervalues Renault and that a 2.5 billion-euro ($2.8 billion) dividend set to go to Fiat Chrysler shareholders should instead be paid to the French company.

Link to comment
Share on other sites

Damn... FCA and Renault deserved each other.

As for puffing up "sales" figures, FCA is still at it- I just read that last quarter they "sold" several hundred pickups into dealer lease fleets to prop up their sales numbers and beat Chevy.

  • Like 1
Link to comment
Share on other sites

8 hours ago, RoadwayR said:

Renault undervalued?  Really?  Hard to believe.  Anyway, deal looked bad to me without Nissan.  Maybe Nissan and FCA ought to talk. 

I would steer clear of Nissan. Japan Inc has a nationalistic agenda. Saikawa would have made a fine Imperial Army officer.

  • Like 1
Link to comment
Share on other sites

2020 Ram 1500 EcoDiesel Dethrones Chevrolet's Duramax Diesel with 480 LB-FT of Torque

Andrew Wendler, Car & Driver  /  June 10, 2019

Ram fires back in the half-ton diesel truck wars with a revised 3.0-liter turbo-diesel V-6.

  • Rated at 480 lb-ft of torque, the 2020 Ram 1500's EcoDiesel model tops the Chevy Silverado's diesel by 20 lb-ft and the Ford F-150's Power Stroke diesel by 40 lb-ft.
  • The Ram EcoDiesel will be available across the entire 2020 half-ton lineup including the Ram Rebel.
  • While fuel economy numbers have not yet been released, Ram is swaggering that its turbocharged 3.0-liter EcoDiesel V-6 will also be the most efficient in the half-ton diesel class.

Well that didn't take long. Less than three weeks after Chevrolet announced that its 420-lb-ft, 3.0-liter turbodiesel Duramax inline-six would finally see the light of day under the hood of the 2020 Silverado half-ton pickup, Ram has staged a torque coup d'état and retakes the throne with an updated version of its turbocharged 3.0-liter EcoDiesel V-6 rated at 480 lb-ft. Not only 14 percent more powerful, it now reaches full torque output at 1600 rpm, 400 rpm lower than the previous version. That means a max tow rating of 12,560 pounds when properly equipped. The Ford F-150 Power Stroke diesel is rated to tug 11,400 pounds, while the Silverado half-ton diesel is slated to earn a 9700-pound tow rating. Ram says the 2020 EcoDiesel will be in showrooms in the fourth quarter of 2019.

Ram is referring to the latest EcoDiesel engine as the third-generation model due to its myriad upgrades. Redesigned cylinder head and intake ports are said to improve both swirl and flow of the incoming air, the aluminum pistons have been redesigned and use thinner rings and a low-friction coating on the wrist pin and side skirts, the compression ratio has been increased slightly from 16.0:1 to 16.5:1, and the high-pressure injectors have been redesigned for optimal operation with the new combustion chamber.

To further reduce noise, vibration, and harshness (NVH), the wrist pins are now slightly offset by about 0.1 inch.

Externally, an updated exhaust-gas recirculation system features a new dual-loop design (high and low-pressure circuits), the added low-pressure loop drawing exhaust gasses downstream of the particulate filter to maximize efficiency, in turn increasing fuel economy.

A new water-cooled turbocharger with variable geometry aims to improve efficiency and responsiveness, the lower portion of the two-piece oil sump uses a lightweight sandwiched polymer/metal material that further reduces NVH and the dual vacuum pump system now uses electric and a new mechanical low-friction pump with new blades said to increase overall efficiency.

The compacted-graphite iron block and forged-steel connecting rods and crankshaft provide the strength and durability required by diesel engines.

Built by the FCA-owned VM Motori in Ferrara, Italy, Ram's 3.0-liter EcoDiesel has always been a bit of wild card in the segment (you can find a storyline of the EcoDiesel's history here), and in addition to bragging rights, we're thinking the updates are long overdue.

.

.

Photo 5.jpg

Link to comment
Share on other sites

  • 2 months later...

Dodge Trucks prices 2020 Ram EcoDiesel truck from $38,585

Automotive News  /  August 16, 2019

DULUTH, Minn. — Ram's 2020 EcoDiesel pickup will start below $39,000 for the base model when it launches in the fourth quarter.

The third-generation EcoDiesel will be priced at $38,585, including shipping, for the two-wheel-drive Tradesman Quad Cab version. Ram said the EcoDiesel is a $4,995 option, which equates to a $3,000 premium over the 5.7-liter Hemi V-8 eTorque or $3,300 over Tradesman, Big Horn/Lone Star, Rebel and Laramie base models.

The 3.0-liter V-6 EcoDiesel engine is produced at Fiat Chrysler Automobiles' Cento plant in Ferrara, Italy.

In a new twist this year, Ram is making the EcoDiesel engine available on the Ram Rebel. The diesel engine produces 480 pound-feet of torque, a 14 percent increase from the previous engine. Horsepower increases 8 percent to 260 hp.

Fuel economy will be announced closer to the release date.

The availability of the EcoDiesel across all Ram trim classes will give the truck "a competitive advantage in the marketplace," said Mike Koval Jr., Dodge Truck director of U.S. product marketing. "From our entry-level Tradesman, all the way up to our premium Limited edition quad cab, crew cab 4X4, 4X2, our consumers will have access to that level of technology and performance and fuel efficiency across the range. We are going to speak to the entire spectrum of diesel buyers."

U.S. sales of the Ram rose 28 percent in the first half, enough for the truck to surpass the Chevrolet Silverado and become the No. 2 seller in the large pickup segment.

Ivan Drury, senior manager of insights for Edmunds, said having the EcoDiesel option across every Ram is "phenomenal."

And he said it's a good fit in the off-road-centric Rebel.

Drury said some consumers balk at paying an extra premium for a diesel engine in a high-end or specialty truck.

The ability to configure the new Ram across the board creates "a huge proposition" for buyers, Drury said, and adding an off-road truck with a diesel "definitely helps."

Link to comment
Share on other sites

FCA may not have that reliable a product, but they're pricing it competitively- You can buy the full size Tradesman EcoDiesel for about the same price as the compact GM pickups with the 2.8 liter diesel, and they're offering 3/4 ton Ram 2500s with the Cummins diesel for about the same price as Ford's half ton F150 with the 3.0 liter diesel.

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

FCA senior manager charged in diesel emissions probe

Reuters  /  September 24, 2019

A senior manager at Fiat Chrysler Automobiles was charged in connection with the Justice Department's probe into excess emissions in diesel vehicles, according to documents unsealed Tuesday.

Emanuele Palma, 40, a diesel drivability and emissions senior manager at FCA, was charged with conspiring to commit wire fraud, defraud the United States, violating the Clean Air Act and making false statements about the emissions system used on Fiat Chrysler's U.S. diesel vehicles, according to a grand jury indictment dated Sept. 18.

Magistrate Judge Elizabeth A. Stafford entered a not guilty plea on Palma’s behalf.  U.S. attorney Timothy Wyse wanted GPS monitoring of Palma because he considered the flight risk “severe,” but he was released on a $10,000 unsecured bond.

Wyse said during the hearing that Palma “was the lead manager, the lead engineer of producing deceptive software that went into over 100,000 vehicles.” Wyse said “as a result of his engineering decisions, his management, his lies, that these vehicles on the road admitted dramatically higher pollutants then were allowed by law.” Wyse said Palma then lied to investigators.

Palma’s attorney, Kenneth Mogill, is ready to contest the charges, saying after the hearing: “We intend to defend this vigorously.” 

Conspiracy to defraud the U.S., commit wire fraud and violate the Clean Air Act, carries a maximum five-year sentence with a max penalty of $250,000. Counts two through seven regarding violations of the Clean Air Act come with a maximum two-year sentences with a $250,000 max penalty. Counts eight through 11 that deal with wire fraud carry maximum sentences of up to 20 years and a $250,000 fine. Counts 12 and 13 regarding false statements carry up to five-year sentences with potential fine to $250,000. 

"We continue to fully cooperate with the authorities, as we have throughout this issue," an FCA spokeswoman said by email.

Palma’s name surfaced last year in a federal class-action lawsuit filed against FCA in San Francisco. Palma, while working for supplier VM Motori, wrote an email to colleagues in 2012 saying FCA “knows tEng is the only way to get to 30 mpg, so don’t worry about this topic,” the suit said. He was referring to software called “t_engine” that was capable of detecting whether a vehicle was undergoing emissions testing.

Palma’s LinkedIn profile shows that he was VM Motori's manager for diesel engine calibration in Auburn Hills, Mich., at the time of the email and left the supplier in December 2014 to join FCA the next month. FCA bought a 50 percent stake in VM Motori in 2011, and purchased the remaining shares from General Motors in 2013.

Civil settlement

Fiat Chrysler agreed to pay about $800 million to resolve civil claims from the Justice Department, state officials and customers alleging the company installed illegal software allowing more than 100,000 diesel-powered vehicles to dupe government emissions tests and then pollute beyond legal limits on the road. The settlement did not resolve any potential criminal liability, the Justice Department said when unveiling the agreement.

FCA at the time said the settlement did not change the company's "position that it did not engage in any deliberate scheme to install defeat devices to cheat emissions tests."

Mark Chernoby, FCA's head of North American safety and regulatory compliance said in that statement: "We acknowledge that this has created uncertainty for our customers, and we believe this resolution will maintain their trust in us."

Despite the civil settlement, Fiat Chrysler could face other financial penalties related to the criminal investigation, depending on what it turns up. The indictment could be a sign of more to come, said Peter Henning, a former U.S. prosecutor who’s now a law professor at Wayne State University.

“It’s hard to think that one person could create a defeat device and not have it noticed by anyone else,” Henning said. “The whole thing with defeat devices is they’re there to sneak things past the EPA," he said, “so it’s hard to think it would be just one person.”

Expanding prosecutions

The renewed focus from U.S. prosecutors on FCA's alleged emissions violations follows cases against Volkswagen Group and a number of that automaker's current and former executives over use of illegal software to fool government diesel-emissions tests and mislead regulators and consumers.

Volkswagen and some of its executives pleaded guilty to criminal charges in the scandal, and the German automaker paid billions of dollars in penalties.

German prosecutors on Tuesday charged former Volkswagen CEO Martin Winterkorn and other company executives in the scandal. A Winterkorn lawyer said the former CEO rejected the claims. He was previously charged in the United States.

The indictment unsealed Tuesday says Palma and unnamed co-conspirators "purposefully calibrated the emissions control system" in Fiat Chrysler vehicles to produce lower emissions under federal test cycles and release higher amounts of nitrogen oxides during real world driving conditions. They concealed the those moves from U.S. environmental regulators, the indictment alleged.

The alleged fraud allowed Palma and the unnamed co-conspirators to obtain a favorable fuel economy rating that made FCA vehicles more attractive to potential customers, the indictment said. Prosecutors alleged the conduct resulted in deceptive claims to customers that the vehicles featured "clean EcoDiesel engines," the indictment said.

Link to comment
Share on other sites

Fiat Chrysler to pay $40 million for inflated U.S. sales figures

Reuters  /  September 27, 2019

WASHINGTON -- Fiat Chrysler Automobiles will pay $40 million for misleading investors about its monthly sales figures and will resolve a lengthy probe by the U.S. Securities and Exchange Commission.

The SEC, in a statement Friday, said that between 2012 and 2016 FCA's U.S. unit issued monthly press releases falsely reporting new vehicle sales and falsely touting a "streak" of uninterrupted monthly year-over-year sales growth, when the growth streak had actually ended in September 2013. In July 2016, the company revised more than five years of monthly U.S. vehicle sales figures to reflect a new reporting method.

Two FCA dealerships filed a federal lawsuit over the inflated sales figures in January 2016. The case was settled earlier this year, but terms were not disclosed. Two other cases were filed by investors claiming securities fraud and those cases were later settled for $14.75 million, Bloomberg reported.

FCA, in a statement issued Friday following the SEC announcement, said: "FCA US cooperated fully in the process to resolve this matter. The company has reviewed and refined its policies and procedures and is committed to maintaining strong controls regarding its sales reporting. The settlement requires a payment of $40 million which will not have a material impact on the financial statements of the company."  

The SEC said Fiat Chrysler put pressure on its business centers "to increase sales, maintain the year-over-year sales streak, and hit internal sales targets, particularly on the last sales day of the month" and as a result some employees at most of the Business Centers "engaged in fake sales reporting."

Dealers were paid to report fake sales in a company database using "cooperative marketing funds" to disguise the payments, the SEC said, adding the database "contained false vehicle sales entries, including false customer names and dates of sales."

The suit said that at the direction of its head of U.S. sales the company used a database of fleet and certain other retail sales "to misreport vehicle sales results and year-over-year growth percentages every month."

Employees referred to the vehicle sales saved for public reporting, the SEC said, with terms like "cookie jar," the "bank," the "bag," and the "kitty."

The Detroit 3 automakers have ended the practice of reporting monthly sales figures and now report on a quarterly basis. 

It was unclear if the settlement would close the government's investigation into the sales reports. The Justice Department declined to comment on the status of its investigation.

In May, Fiat Chrysler Automobiles' U.S. sales chief Reid Bigland sued the company claiming it withheld 90 percent of his 2018 compensation because he cooperated with the SEC probe. An Oct. 3 hearing is set in the suit.

Bigland said in his lawsuit that the company's sales reporting methodology had been in place since the late 1980s and was widely known throughout the company including by Sergio Marchionne, who was CEO until his death in July 2018, and other senior executives.

Link to comment
Share on other sites

  • 2 weeks later...

EPA Rates 2020 Ram 1500 EcoDiesel at 32 MPG Highway

Eric Stafford, Car & Driver  /  October 7, 2019

  • The 2020 Ram 1500 EcoDiesel earns up to 22 mpg city and 32 mpg highway, according to the EPA. That's for the 2WD model.
  • Half-ton Ram trucks equipped with the diesel engine and all-wheel drive are rated at 21 mpg city and 29 mpg highway.
  • The base Ram 1500 with the EcoDiesel engine starts at $38,585, making it the cheapest light-duty diesel in its class.

While many expected flying cars to be a thing by now, who thought full-size pickup trucks would be able to exceed 30 mpg? Well, kids, the 2020 Ram 1500 EcoDiesel is the latest light-duty pickup truck to make that once unthinkable feat a reality.

Now that the diesel 3.0-liter V-6 has returned to the Ram 1500 lineup, the EPA has released its fuel-economy estimates. The rear-drive version is expected to earn 22 mpg in the city, 32 mpg on the highway, and 26 mpg combined. Models with all-wheel drive are rated at 21 mpg city, 29 mpg highway, and 24 mpg combined. We tested the AWD model on our 200-mile fuel-economy route before its EPA certification and saw 24 mpg highway. While that number is obviously short of the government's rating, it's still 6 mpg better than the V-8 Ram we tested.

The 2020 Ram 1500 EcoDiesel isn't the only truck in its class that offers these notable EPA ratings. Both the half-ton Chevy Silverado and GMC Sierra with the optional Duramax diesel 3.0-liter inline-six are in the 30-mpg club. In fact, the oil-burning Chevy one-ups its Ram counterpart by earning up to 33 mpg on the highway, 23 mpg in the city, and 27 mpg combined.

Still, the Ram's EcoDiesel powertrain edges out the Power Stroke diesel 3.0-liter V-6 that's available on the Ford F-150. For comparison, the Blue Oval's downsized diesel is rated at up to 22 mpg city and 30 mpg highway for the 2019 model.

The EcoDiesel also owns the all-important torque crown with 480 lb-ft of twist, which is 40 more than Ford's Power Stroke and 20 more than GM's Duramax. What's more, the diesel Ram 1500 generates 70 lb-ft more than the brand's 5.7 Hemi V-8.

The Ram's new EcoDiesel engine will be available on all 2020 body styles and trim levels. That even includes the off-road-oriented Rebel model for the first time. Those looking for the most stump-pulling power from a 2020 Ram 1500 can have it for under $40k since EcoDiesel-equipped versions start at $38,585. That makes it several thousand dollars less expensive than its diesel-powered half-ton competitors.

.

Photo 4.jpg

Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...

UAW workers ratify FCA labor deal by broad margin

Michael Martinez, Automotive News  /  December 11, 2019

DETROIT -- Fiat Chrysler's roughly 47,000 hourly UAW workers overwhelmingly ratified a new four-year labor contract, ending the most contentious set of Detroit 3 negotiations in years.

Roughly 71 percent of workers voted in favor of the deal, the union said Wednesday.

"Every full-time production employee currently at FCA will be at top rate by the end of this four-year agreement," Cindy Estrada, UAW Vice President and Director of the UAW FCA Department, said in a statement. "All temporary workers now have a defined pathway to full time and top pay as well."

The FCA contract passed with a much higher margin than similar pacts at General Motors and Ford Motor Co. Roughly 54 percent of GM workers passed the deal following a 40-day strike, while the Ford contract passed with 56 percent of workers voting in favor.

“We wouldn’t be the company we are today without the contributions of our UAW-represented workforce, and this contract recognizes and rewards their dedication in helping us achieve that success,” Mark Stewart, COO for FCA North America, said in a statement.

The Detroit 3 negotiations took 88 days to complete, longer than the last round in 2015, when talks with all three automakers wrapped up by Thanksgiving.

Tense times

Tempers flared from the outset.

The union, angry over GM's plans to shutter four U.S. assembly plants, picked GM as its target company, calling a national strike 24 hours after the previous contract expired after accusing GM bargainers of failing to respond to their demands until the 11th hour. The strike was marked by strongly worded public accusations from both sides that the other was playing games and failing to respond to proposals in a timely manner.

After a tentative agreement was reached, a vocal minority of workers grumbled that the gains were not significant enough to warrant the 40 days spent on picket lines.

The union bargained in the midst of a crisis, as federal prosecutors moved ahead with a years-long corruption probe that, over the course of the talks, resulted in new charges and the resignation of former President Gary Jones and former Region 5 Director Vance Pearson.

Shortly after UAW negotiations began with FCA, GM filed a lawsuit accusing its crosstown rival of a conspiracy to run up GM's labor costs in a bid to force a merger.

Despite the obstacles, the union was able to negotiate deals that preserved some of the nation's best health care benefits; accelerated the path to the top wage and benefits package for newer workers; and created a more defined path for temporary workers to achieve permanent status.

Labor cost gap

The FCA deal boosts profit-sharing payouts by 13 percent and gives less-experienced hourly workers the same health care coverage as veteran employees. Full-time workers will get a $9,000 bonus check — the same as Ford workers — while temporary employees get $3,500.

The agreement calls for FCA to create 7,900 jobs with $9 billion in U.S. manufacturing investments through 2023. The figures include 6,500 jobs announced under a $4.5 billion plan to open a second assembly plant in Detroit and expand other plants in the area.

The UAW valued the deal at an extra $29,500 over four years for an average production worker, matching the economic gains in the Ford contract. Like the GM and Ford deals, FCA workers will get 4 percent bonuses this year and in 2021 and 3 percent wage increases in 2020 and 2022.

The planned investments include $7.8 billion for assembly plants, $615 million for powertrain plants and $495 million for stamping plants. Among the new commitments are $450 million for the Indiana Transmission Plant II to create up to 1,040 jobs and $160 million for Toledo North Assembly to create up to 100 jobs making plug-in hybrid Jeep Wranglers.

Colin Lightbody, a former FCA negotiator who now heads a consulting company, said the FCA contract will close the labor cost gap with its domestic rivals. FCA has had an $8-an-hour edge over GM over the past four years, compared with a $5.35 disadvantage for Chrysler in 2006.

"The elements that I thought that they would try to get more in alignment with GM and Ford were their health care, where the in-progression employees had a different plan design than the traditional employees. They brought those in line," Lightbody said. "On the profit-sharing formula, they tweaked it bit to bring it a little closer to what the GM and Ford formula is paying."

Link to comment
Share on other sites

Closing the wage gap and $9000.00 bonus is why this passed. FCA is adding jobs still at the low starting wage. FCA is doing good around SE MI ( Toledo is part of this area ). But this all about selling more Jeeps and Ram trucks, will see if they are right.  

Link to comment
Share on other sites

  • 2 months later...

Rebel TRX a Hellcat pickup

Vince Bond Jr., Automotive News  /  February 16, 2020

Throw a Hellcat engine in a Ram, and things get interesting.

Ram already upended the pickup race by using a mix of luxury and capability to outsell the Chevrolet Silverado for the first time last year. Now the Fiat Chrysler Automobiles brand has a chance to set a new standard for performance in the pickup space with the Ram 1500 Rebel TRX, which is expected to give consumers major punch right from the factory with 707 hp.

If rumors of a Hellcat-equipped TRX hold true, that level of output would leapfrog the 450-hp Ford F-150 Raptor and make the competition for bragging rights in the pickup world even more intense. FCA has teased the idea for years, and a Rebel TRX spotted in camouflage signals that the Raptor is about to get new competition.

Ram introduced the Rebel TRX concept during the State Fair of Texas in 2016. FCA said the concept "has an exterior design that radiates focused aggression." That model was powered by a 6.2-liter Hemi V-8 delivering 575 hp.

The TRX could potentially go on sale later this year.

"There's a redesigned F-150 right around the corner, and I wouldn't be surprised if Ford comes out with something to answer FCA on this," said Kelsey Mays, Cars.com's senior consumer affairs editor.

"There's a lot you can do with forced induction, with supercharging and turbocharging engines," Mays said. "You can really get a lot more power out of an existing engine. Ford's got a lot in its wheelhouse. Certainly, we're seeing that right now on Mustang."

Spreading the muscle

History has shown that FCA is indiscriminate when it comes to spreading muscle across its lineup — in cars, pickups and utility vehicles. After introducing the Hellcat engine in the Challenger and Charger, FCA dropped it into the Jeep Grand Cherokee to create the Trackhawk, a blistering SUV option that costs nearly $90,000.

In the early 2000s, Chrysler pushed the envelope with the Dodge Ram SRT-10, a pickup outfitted with a Viper engine. It called the SRT-10 the "Viper of pickup trucks" and earned a Guinness Book of World Records entry for "World's Fastest Production Pickup Truck."

With the added horsepower, Mays believes a Rebel TRX would top the Raptor's $54,800 base price by as much as $12,000. He thinks 20,000 vehicles annually is doable for the TRX, which would serve as a halo for the Ram lineup.

Although the Rebel line is targeted at off-road enthusiasts, Mays doesn't see it eating into Jeep Gladiator sales.

"This is an engine that they've already scaled out to several other products, and so if it's not a hit, and actually shoppers don't want it, it's not a huge loss for FCA in terms of just development," Mays said. "So putting it out there and seeing what the market will bear, they could probably afford to come in from a higher price point and see what happens."

Brian Moody, executive editor for Autotrader, would like to see a bare-bones version of the TRX aimed at true off-road buyers for around $45,000. An "ultra-base" model, he said, could forgo creature comforts such as carpeting. Moody thinks the TRX would play in multiple worlds by appealing to the muscle car crowd as well.

Consumer response

Ivan Drury, senior manager of insights for Edmunds, said the TRX could achieve the type of performance numbers some were hoping for when the Rebel trim debuted in 2015. With the Hellcat craze playing out so well over the years, Drury said it makes sense to bring it to Ram.

Drury believes Ford still would be able to capitalize on the loyalty it has built with the Raptor, but it would have to keep an eye on how consumers react to the TRX and respond accordingly.

"It's one of those things where if they do see enough trade-ins going toward FCA, if they see that halo effect that really happened with Raptor begin with FCA — if they start stealing share, they steal eyeballs — then the most logical thing to do is really up the ante," Drury said. "And, if so, they're really going to have to crank it up to tremendous proportions."

The idea for the TRX came from former Ram brand chief Mike Manley, now FCA's CEO, who challenged designers and engineers to build a truck that could drive at sustained speeds of more than 100 mph off-road.

In addition to the sales generated by a TRX, Ram would benefit from having an additional way to brag about its lineup relative to the competition, Drury said.

"Not every one of these guys is going to take this thing off road; [they're] not going to be street-racing these things to death," he said, "but those bragging rights, I think they matter moreso in trucks than in any other segment."

.

Photo 2.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...