Dirtymilkman Posted December 21, 2015 Share Posted December 21, 2015 My 1990 CH is completely stock. 4 valve E6 all stock parts. I put a new injector pump on a few years ago and we dyno'd it. It was 336hp to the rear wheels. I was curious if anyone else has dyno'd one? What realistic, real world hp are they capable of? I was told 400 is all the bottom ends are good for. Has anyone juiced one up and dyno'd it? Quote Link to comment Share on other sites More sharing options...
Motorwood Posted January 11, 2016 Share Posted January 11, 2016 We have one that has put 970HP to the wheels. It doesn't pull trailers though, just a sled. Quote Link to comment Share on other sites More sharing options...
Dirtymilkman Posted January 12, 2016 Author Share Posted January 12, 2016 We have one that has put 970HP to the wheels. It doesn't pull trailers though, just a sled.Is,this for real? Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted January 12, 2016 Share Posted January 12, 2016 No way Quote glenn akers Link to comment Share on other sites More sharing options...
Timmyb Posted January 12, 2016 Share Posted January 12, 2016 I reckon 336hp at the wheels is pretty good for a 350hp engine. Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted January 12, 2016 Share Posted January 12, 2016 Years ago when we had a dyno it was 23 % lost to the rear wheels.I know now oil is better and gears are made better along with tires so that is very go for a 350.I would say it got the fuel turned up on it. Quote glenn akers Link to comment Share on other sites More sharing options...
GOOG Posted January 12, 2016 Share Posted January 12, 2016 Tough to believe a 350 is putting 336 to the ground. I would expect to see 18 to 20 percent loss. What HP is your engine? Quote Link to comment Share on other sites More sharing options...
GOOG Posted January 12, 2016 Share Posted January 12, 2016 What was cost to dyno? I'd love to have mine done. - Tom Quote Link to comment Share on other sites More sharing options...
Dirtymilkman Posted January 12, 2016 Author Share Posted January 12, 2016 Its a 1990 ch613. We dyno'd it after we put a new injection pump on it in 1999. The pump wasn't turned up, the factory wires are still through the bolts. A Mack guy once told me that the 350 4 valve was good for 400 hp at the crank. I'm just curious if anyone has done different injectors or turbos on an e6 4 valve and what it yielded. Quote Link to comment Share on other sites More sharing options...
mack mhe9 Posted January 12, 2016 Share Posted January 12, 2016 970hp would move alot of milk. Quote Link to comment Share on other sites More sharing options...
Dirtymilkman Posted January 13, 2016 Author Share Posted January 13, 2016 970hp would move alot of milk.Haha, and pull a pup trailer behind with fuel in it 2 Quote Link to comment Share on other sites More sharing options...
Motorwood Posted March 4, 2016 Share Posted March 4, 2016 And burn a lot of Pistons.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.