Poon Miner Posted September 13, 2015 Share Posted September 13, 2015 I'm in the process of switching fuel tanks......the big one on drivers side seeps....the smaller one on the passenger side was completely by-passed because of hole in tank....don't need the capacity pf the bigger tank so am having the smaller one repaired and making a switch......so kind of inspecting all the fuel lines and some (all?) are going to need replaced and thinkin' I'm gonna have to use the hand primer when going back together.....tried it....totally will not move.....is this because the system has pressure?....I mean I know it can get hard to pump....I've primed Cat loaders and dozers lots of times but you can still pump it even when it's not needed( like when threre's a old rag in the fuel tank and you just think you're out of fuel)....or is it B.O. and if so we come to my first question.........does anyone know a part #?...or a place to start?.....'58 B67....it's a END-673....not a turbo.....I'm still learning but it's box stock.....Also the fuel and oil filter both are stock canister....any help with a start on numbers for these would be appreciated......the closest I've come to a number on the oil filter is a Luberfiner 500C.....does this sound close?.....no clue on the fuel filter........thank you...Other than that everything ok here in Tucson.....the college kids are all back....nothin' to see here......move along.................. Quote Link to comment Share on other sites More sharing options...
Bobby j Posted September 14, 2015 Share Posted September 14, 2015 Here goes ya a couple of filter numbers from NAPA........ 533090. Fuel filter for canister 551030 oil filter for by-pass filter canister My b has the big full flow canister filter and I lost the lumber-finer number Hope these will help you out.......Bobby j. Quote Link to comment Share on other sites More sharing options...
thomastractorsvc Posted September 14, 2015 Share Posted September 14, 2015 Make sure to get the oil filter o ring that goes on top, I didn't when I changed mine thought I could reuse as it was not broken, could never get it stop seeping oil so bought a new one no more oil leaks, go figure! Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
Poon Miner Posted September 14, 2015 Author Share Posted September 14, 2015 Thank you much Bobby ,I will look at those filters....I kind of measured the canisters and if these look like a fit I will give them a try....good advice on the O-ring....will be my first time changing this kind of filter....thank you John, Quote Link to comment Share on other sites More sharing options...
Poon Miner Posted September 20, 2015 Author Share Posted September 20, 2015 Me and my son cussing and having a ball....... 1 Quote Link to comment Share on other sites More sharing options...
39 Baby Mack Posted September 20, 2015 Share Posted September 20, 2015 Mack fuel filter #237GB13Baldwin #PF819Ron Quote Link to comment Share on other sites More sharing options...
Poon Miner Posted September 20, 2015 Author Share Posted September 20, 2015 napa 3090....fuel filter....that is it thank youthis is the supply pump/hand primer........the hand primer seems to have a bent shaft and the lock was shade tree fixed and so I found one on ebay for 25 bucks.....PAI # EPP-3586.....the Mack and Bosch part #s are on the listing...I guess parts from PAI are OK??Martha likes engine parts on the kitchen counter..... Quote Link to comment Share on other sites More sharing options...
Poon Miner Posted September 20, 2015 Author Share Posted September 20, 2015 Hey Ron ...thanks for those numbers...I'm writing everything down and trying to find places in town where I can get stuff....I'll post more pics as work progresses.....it's slow going just doing a little at a time on weekends but it'll get there.......John Quote Link to comment Share on other sites More sharing options...
KKERGALL Posted September 20, 2015 Share Posted September 20, 2015 236GB311A OIL FILTER343SB87 ORING319GC110 FUEL PUMP318GC17C PRIMER PUMP Quote Link to comment Share on other sites More sharing options...
Poon Miner Posted September 20, 2015 Author Share Posted September 20, 2015 Thanks Gall......part #s seem to be tuff to get ......I went over to the Mack dealer yesterday...some kid behind the counter....he did'nt know what I was showing him and he says he can't help me unless i have the part#.......I'm thinkin' ain't that yer job?.........Yeah I'm starting my own parts book on the 'puter as I go.....thank you guys for all your help........ Quote Link to comment Share on other sites More sharing options...
41chevy Posted September 21, 2015 Share Posted September 21, 2015 Thanks Gall......part #s seem to be tuff to get ......I went over to the Mack dealer yesterday...some kid behind the counter....he did'nt know what I was showing him and he says he can't help me unless i have the part#.......I'm thinkin' ain't that yer job?.........Yeah I'm starting my own parts book on the 'puter as I go.....thank you guys for all your help........Thats common all over. Asked the local parts guy for a few 1/2" star washers and got a blank stare and what vehicle does it fit? 5 minutes of trying to explain and I gave up. Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.