diggerpro Posted July 7, 2015 Share Posted July 7, 2015 Has anyone done any conversion of the old style brakes / chambers to use maxi brake chambers on them? Any Ideas here are appreciated !! Quote Link to comment Share on other sites More sharing options...
j hancock Posted July 7, 2015 Share Posted July 7, 2015 A couple of links for some reading. Gives some tips and a link to a Bendix Brake catalog. Offset slack adjusters will probably be needed.http://www.bigmacktrucks.com/index.php?/topic/38301-another-b81-build/?hl=another+b81http://www.bigmacktrucks.com/index.php?/topic/33425-im-back-and-need-new-chambers/?hl=new+chambers Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
mackmb212 Posted July 21, 2015 Share Posted July 21, 2015 This is something I'm currently working on as well for my b81 the only problem I found so far is the maxi chamber I have has 2 ports on the service brake side one will be sticking almost straight up but the other port will interfere with the inspection plate for the brakes but only on the driver side. Here are a few pictures from a show I went to.this is a b81 dump Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.