cncFireman Posted January 30, 2014 Share Posted January 30, 2014 What model is this heavy hauler? http://portland.craigslist.org/grg/hvo/4304936100.html Quote Link to comment Share on other sites More sharing options...
41chevy Posted January 30, 2014 Share Posted January 30, 2014 M35 or M45 Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
mackdaddy Posted January 30, 2014 Share Posted January 30, 2014 Most all of the off road Macks in the NW came out of the Hanna Nickel Mine in Riddle, OR. they had a fleet of them. Quote Link to comment Share on other sites More sharing options...
rsb502 Posted January 30, 2014 Share Posted January 30, 2014 hard to tell from those pics with nothing for scale but it looks like an M35 with forward mounted ladders like an M50 to me, its not an m45 the 45 was a tandem axle and its small and has the wrong headlights to be a 50 i think(missing a step too). Of course they changed a little over the years so it may be either an early or late 50 since the size is close (again without scale). Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
ap40rocktruck Posted February 1, 2014 Share Posted February 1, 2014 M-35AX, the "AX" version had the wheel & tires increased to 18:00 x 33 from the standard 18:00 x 25 on a M-35X. The rear drive axle is the same on both the X & AX, but the AX has a special built 33" wheel adapter. The "AX" front wheel is unique to this model and was not used on any other Mack product. Either Cummins KTA-450 or DDC 12V-71N for power.Rick 1 Quote Richard MarkOwner / Master Model Maker Industrial Model DesignAp40rocktruck Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.