Maddog13407 Posted October 14, 2012 Share Posted October 14, 2012 last time i was in Harrisburg right off of 81 i went past the Mack dealer and could have sworn they had a C model out back. they also had a B62 or B68 with factory bud wheels all the way around and i think a B42 was back there also. Quote Link to comment https://www.bigmacktrucks.com/topic/27770-new-owner-of-a-1964-mack-c600/page/2/#findComment-141684 Share on other sites More sharing options...
tkobes43 Posted October 15, 2012 Share Posted October 15, 2012 On 10/14/2012 at 9:02 PM, farmer52 said: Watts used to have a C model. You might contact Barry to see if they still have it.Contacted barry, they still have it but want 2500 for it :/ Tom Quote "Nothing Breaks Wind Like A Bulldog" Link to comment https://www.bigmacktrucks.com/topic/27770-new-owner-of-a-1964-mack-c600/page/2/#findComment-141822 Share on other sites More sharing options...
umodelnut Posted October 15, 2012 Share Posted October 15, 2012 Hey Barry, can we have some pictures? Quote Link to comment https://www.bigmacktrucks.com/topic/27770-new-owner-of-a-1964-mack-c600/page/2/#findComment-141839 Share on other sites More sharing options...
tkobes43 Posted October 16, 2012 Share Posted October 16, 2012 Its the one in the Bone Yard Gallery. Tom Quote "Nothing Breaks Wind Like A Bulldog" Link to comment https://www.bigmacktrucks.com/topic/27770-new-owner-of-a-1964-mack-c600/page/2/#findComment-141872 Share on other sites More sharing options...
Vladislav Posted October 24, 2012 Share Posted October 24, 2012 Couldn't y On 10/16/2012 at 1:26 AM, TBone said: Its the one in the Bone Yard Gallery.TomCouldn't you put a link?Had no luck to find it. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/27770-new-owner-of-a-1964-mack-c600/page/2/#findComment-143015 Share on other sites More sharing options...
Milaca Posted November 5, 2012 Author Share Posted November 5, 2012 (edited) I repaired the PTO two weeks ago (broken shift fork, it's made of stamped steel and I was able to weld it back together) and now the dump-box raises, I can now start the truck from within the cab (corroded starter cables at the starter motor and corroded terminals on the ignition switch were the culprit) and I now have the brake treadle valve assembly repaired. Unfortunately, the brakes are not yet working as they should as the brakes are not releasing. Ran out of time/daylight this weekend so that will be my next project. I began digging a wildlife pond and I intend to use this truck to haul the spoil from the lowland up to high ground. If I dont get it done soon, there is always next year. Edited November 5, 2012 by Milaca 1 Quote Link to comment https://www.bigmacktrucks.com/topic/27770-new-owner-of-a-1964-mack-c600/page/2/#findComment-144575 Share on other sites More sharing options...
BOB DINGSDALE Posted November 5, 2012 Share Posted November 5, 2012 That truck looks like it will clean up real easy and be a nice show truck Quote Link to comment https://www.bigmacktrucks.com/topic/27770-new-owner-of-a-1964-mack-c600/page/2/#findComment-144679 Share on other sites More sharing options...
umodelnut Posted November 5, 2012 Share Posted November 5, 2012 On 11/5/2012 at 3:07 AM, Milaca said: I repaired the PTO two weeks ago (broken shift fork, it's made of stamped steel and I was able to weld it back together) and now the dump-box raises, I can now start the truck from within the cab (corroded starter cables at the starter motor and corroded terminals on the ignition switch were the culprit) and I now have the brake treadle valve assembly repaired. Unfortunately, the brakes are not yet working as they should as the brakes are not releasing. Ran out of time/daylight this weekend so that will be my next project. I began digging a wildlife pond and I intend to use this truck to haul the spoil from the lowland up to high ground. If I dont get it done soon, there is always next year. Cool! Are you going to restore the truck? She looks good there, all them little things add up ya know? Keep up the good work and pictures! My U model doesnt have brakes either, the truck wont build air, so we didnt think it would move but it did. I think the compressors dead in mine. Quote Link to comment https://www.bigmacktrucks.com/topic/27770-new-owner-of-a-1964-mack-c600/page/2/#findComment-144683 Share on other sites More sharing options...
GTR Posted June 9, 2021 Share Posted June 9, 2021 My Father and I bought a C-600 (model C607) in 1976. In my research I found that there are 4 sub-models; C607, C609, C611, and a C615. What are the differences in the different models? George Quote Link to comment https://www.bigmacktrucks.com/topic/27770-new-owner-of-a-1964-mack-c600/page/2/#findComment-475029 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.