Jump to content

hicrop10

Pedigreed Bulldog
 View Profile  See their activity

  • Posts

    1,496

  • Joined

  • Last visited

  • Days Won

    10

 Content Type 

Everything posted by hicrop10

  1. hicrop10
    Looking for the part number for a 79 r model heater switch?
  2. hicrop10
    Try McMaster& Carr
  3. hicrop10
    Just asking,but what did they do to get ban in the first place?I never saw anything that would be considered harmful(for the lack of better words).
  4. hicrop10
    Fwd,we did some work many years ago up at the plant that Kovat’s(my spelling may be off)used to make the airport rescue tankers.We actually brought one of his tank for an r model we made in to a water truck.Your truck looks great would like to see the final product.Big bucks.
  5. hicrop10
    I got pulled over by dot years back.I had our lowboy 4 axle tractor 4 axle trailer.Had a Ts-24 on( that a twin engine scraper).Grossing out around 150,000.The officers walked around look at everything and left me go,said the truck and trailer were clean looking no oil leaking any where.They just checked my permit and I was off.
  6. hicrop10
    They had 3 different shades.Light,med,dark.The part numbers for spray cans are 3121106p,3121107p,3121108p.
  7. hicrop10
    The only part I can take off the cab is the small piece right above the window,the air horn pull cord is attached to.Will have to polish it up a bit.
  8. hicrop10
    Tks,I have the part numbers for them but are no longer available.Need something I can take to the paint store and have them match it up.
  9. hicrop10
    If my memory serves me right that company you mentioned reproduced some items for the older Mack’s.It’s been at least 30 years since I heard of them.
  10. hicrop10
    Looking for the paint code for the beige or brown interior paint that Mack used .
  11. hicrop10
    Is that your single axle Mack that was in that repair shop in Norristown?Used to see it when I would drop off or pick up trucks for work.
  12. hicrop10
    We’re those pictures taken in the highway material pit.Spent plenty of time there when Corson’s owned it doing their stripping.The truck looks great.
  13. hicrop10
    I started in my dad shop doing all the steaming of the equipment when it came in for repairs.
  14. hicrop10
    I don’t have much Mack extras,I mainly have caterpillar and other equipment literature.
  15. hicrop10
    Is that the one you are looking for?If so will look today through all my boxes to see if I have an extra one.
  16. hicrop10
    Tks.
  17. hicrop10
    Mad dog,how far back did u leave it un coated to do the welding.I have been thinking of going this way.Thanks Mike
  18. hicrop10
    Will be trying to clean and seal the 2 fuel tanks off my b87.Was wondering what method you guys have tried?I have throught about hanging a tank in some sort of a gib to shake it about,not quite as young as I was back in the day.Would have just held it and shook it about.
  19. hicrop10
    It could be the injection pump.
  20. hicrop10
    Use a pair of vice grip to twist the handle on the inside of hole.
  21. hicrop10
    Never been in a quarry that didn’t have a dozer of their own.Didn’t look like it was very wet where he was stuck.Also could have done without that god awful music.
  22. hicrop10
    The truck still didn’t run with the new pump from Mack on it.After thinking about it I changed the lines on the pump around,sure as shit when they rebuilt it they changed the suction side to the push side.Truck runs great now,will take it out on Saturday for a spin.
  23. hicrop10
    I had the same problem with my 79 r model,turns out to be the primer pump on the side of the injection pump.
  24. hicrop10
    Can you recall the title of the thread?
  25. hicrop10
    66dc75,that’s a beautiful truck.Is it yours?

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...