MACKS

Most of those trucks are owned by the government,how come no kw or pete's in the video

Just think two more years and you can get SS,if there's any left that is..have a good one!!

^{I have a few 10/22 10 round mags But what about my Calaco M-100, my Calaco M-50}

^{my Henry U.S.A.F. Survival? The Calacos have specific mags, there are no small capacity ones. The Henry mags store in waterproof slots in the stock. 3 rounds shorter and you will not remove them if needed. If you read the law you will see a background check for purchasing ammo and registering ALL long guns with the police.}

^{Cumo and select lawmakers drafted the bill in closed sessions, presented it to the state legislature at 11pm Monday night (after the viewing gallery was cleared of civies) 5 minutes for the senators to read the bill and a fast track vote. The vote was immediately validated, Cumo signed it, his signature validated and was and it was immediately on the books and enforceable by 1 AM. No debate, no nothing. Remington Arms, Henry Arms in Brooklyn today questions the impact on the business and employees possible job losses, Cumo said "hate to see you go". The potential of 7000 jobs lost will be absorbed by other industries according to him. Grand standing just to boost his future bid for the presidency and to kiss obamas a$$. IMO}

I

I can't find where it says all long guns must be registered..

you want to use huck bolts or grade eight fine thread nut/bolts if you go that way. You can order them with or without holes its just a lot more expensive.

Read through this thread from last year-

http://www.bigmacktrucks.com/index.php?/topic/22689-359-peterbilt-frame-rails/

I thought the holes were drilled with a special tapered bit and u used frame bolts to match..

If the land fill knows what there getting and agreed I would just run it but I would defiantly stay away from the scales and any possible dot check spots,that's a normal day for me,lol

Another little piece of out freedom gone with the stroke of a pen,they keep chipping away some day there will be nothing left..

Is she pretending the fender is a fun house mirror - or is she relieving herself into the floor drain?

I think she cut one,you can see the blond looking at her kind of funny

They missed a spot so I had to have it done again

The latch on the cab is what you need to adjust,takes a few try's to get just right!

Might be the most handsome truck Mack ever made..

My cuz built a dump from one years back,15' aluminum body and big 24'' rubber,sweet looking truck,still around town,I'll see if I can get a picture for you Superliner guys!!

Lookin Good,sure would make a nice dump truck

He must have some tough skin!

I have a hose reel mounted to the frame right next to my fuel tank and an electric fuel pump mounted in line,works great for spraying the bed down for hauling asphalt or during the winter when running loads of dirt or stone..

If I had your writing abilities I would quit trucking and write short stories for a living,best of luck for the rest of the new year...

In all fairness I've had no issues with state troopers, I've had speeding tickets in both Ohio an PA and the troopers were cordial in both circumstances. The PA trooper even bumped my speed down 6 mph to keep me out of more serious trouble (I was clocked at 71 in a 55 )

It was with locals and a few DOT officers that I've had issues.

Maybe I misunderstood,sounded like not only did he get stuck and got lucky and got out without a tow but the trooper didn't notice or care that the truck had no plates on it possibly not registered or insured..

Wondering about the speaker on the dash,is that one of the Motorola 12 volt speakers that they used to use in the police cars,I bought one on e-bay and tried to hook it up to my cb as an external but it wouldn't work..

Maybe just a gasket!!

Ha,Ha, you sure did get lucky,round here the trooper would impound the truck,give you a chit load of tickets and left ya standing on the side of the road...

Can't comment on 18 wheeler but there are a bunch of triaxle dumps running around here with air ride,they look like yo-yo's going down the road bouncing up and down,I'd get sea sick driving one,as far as trunnion bushing's I know guys that have 30 years on the original bushings,camel back all the way,it's so simple and works so well...

Rob,just rub a mixture of baking soda and water[nice thick paste] on momma's ass and them splinters will dam near pop out all by them selves...Happy Holidays to you and your family!

interior behind the carpet, I put one layer on got it rolled into all the corners then put the other layer on overlapping the seams then replaced the carpet, its kind of a pin to get it up into the cowl around the corners but man its worth it.

Just keep in mind it's a sound deadener not a sound blocker it deadens the sound by stopping noise that is caused by vibrations in the sheet metal.If you can add something to absorb some of the sound waves bouncing around it would help a lot,but you'll never reach the quietness of a newer truck because of the way the newer trucks are isolated from the frame and drive train,floating on those big air bags..

Roof flashing or ice guard sold in home depot is very similar and a lot cheaper,also there is an insulation sold in marine stores that some say is the best stuff on the market but pricy,rubber backed carpet is also a good choice for the inside fire wall,cab isolation is the key,the more the cab is isolated from the frame the quieter it will be..

I don't believe you,she would have had to flunk you because of an abnormal heart rhythm..lol

I don't know one local trucking company around here working for FEMA or the primary contractor,they are all out of state,guess you gotta belong to the club..