Jump to content

fauthpk

Bulldog
  • Posts

    181
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by fauthpk

  1. I have several. Send me a picture. I have the hubcaps used on the b20 or fire engines.
  2. Was my first Trucktoberfest. I'm blown away by how nice everything was at the museum. Was great meeting a few of you there. Tried to get to meet some of you multiple times but you were all busy talking with others. Met a family who just bought a B20. Looking forward to seeing them at the show. To all of you on this site and the many of hours spent on these vehicles this weekend was worth it in my opinion. Hats off to all of you. Pete
  3. Sounds like the float might have a pin hole in it causing fuel to fill the bowl, which in turn will cause it to flood requiring you to raise rpm. if thats the case you will never be able to shift at right rpm which for me is 1200-1500. one of the greatest pleasures of owning an antique vehicle is being abe to go through the gears. also- make sure the tranny is full of gear oil. zenith carbs the number is on the top. ebay is a great spot to find replacement bowls..
  4. I'll be there too. Up for meeting the guys and gals!!!
  5. Yes- truck is staying at museum. I'm looking forward to seeing all the other b models. Top speed is about 40mph. Too slow to drive.
  6. I am honored that the Mack Museum has requested to display my B20 Mack. Looking for someone to transport from Fishkill, NY to the museum. in September for Trucktoberfest. I would prefer a Mack to tow her in. If anyone is interested Please let me know. Thanks, Peter
  7. There should be a tag on the carb to tell you what model. They sell rebuild kits or look on ebay. I found a new one for my B20. Need additional help, let me know. Pete
  8. Kevin All has one for sale. It was on eBay for a while. Has all the parts to finish. His phone number off the top of my head is 607-652-7704.
  9. I have a B20 with an EN 291, 5 speed. I'm lucky if I hit 45mph. But I'm not in a rush when I take her out. In your booklet it will also tell you not to lug or over rev the engine. At this point I have owned the truck for 6 years. I can shift up and down based on sound of the engine. That is correct. Also the reason why the small B models don't have the rot like the larger versions. Not exposed to road salt as much.
  10. In my Mack I've been told to run 15w40. On one of the forums I read that if an engine has a filter use a detergent Oil. No Filter- Non-Detergent. Best to flush the engine as written above then start new.
  11. Been off the site for a while. Glad to be back on looking around. I would like to get a bit more speed on my little B20. It has the 2speed rear but not enough. Would like to slow engine down a bit while traveling at 40mph. Is this something that can easily be done? Yes- rear end is in high. Thanks, Peter
  12. Thank you. He was my dad. Donated all the antique Mack tools from his grandfathers trucking company to the Mack Museum.
  13. Vin- it was my opinion on adding a y pipe to large diameter uncorked pipes. I like the look and the sound. The statement regarding racing the engine was nothing more than something to be cautious about.
  14. Walter R. Fauth MARMORA, NJ - Walter R. Fauth, 64, of Marmora, NJ passed away July 24th at Thomas Jefferson University Hospital after a brief Illness. He was born in Yaphank, NY on July 31st, 1948. He was a long time resident of Hopewell Junction, NY and Hutchinson Island, FL. Walter was the son of Dorothy Fauth and the late Helmut Fauth of Jefferson, NY. Walter graduated Valedictorian of Longwood High School in 1966. He received a Bachelors Degree in Engineering and his Masters of Business from Rensselaer Polytechnic Institute, Troy, NY. Walter retired after a successful career of 33 years at AT&T in the position of Global Account Manager. While residing in Florida he was active in many organizations that benefited the community where he resided. Walter had a passion for antique trucks. His latest project was a 1956 B20 Mack which he enjoyed restoring with his sons. He was also actively involved in business development for his son's landscape company. He will best be remembered for his devotion to his family, and friends.
  15. Nice truck. One little piece of advice. Never rev an engine that's not under a load. Save up some money for 5" stacks.
  16. Nice truck. You will find a lot of parts on eBay. Like someone else posted you will find a lot of parts are interchangeable. For instance, the horn button parts I found through ford restoration catalog. Try calling Kevin All. 607-652-7704.
  17. Looking to paint the engine this spring. I have an EN291. I know someone on here knows the Mack color. I may go with gloss black. Thank you all in advance. Pete
  18. The gentleman selling it is Robert. 914-403-7427. If you need to store it my shop is located in Stamford, CT off exit 9 i95. Good luck. It's a beauty. If you need more pictures or video I'm happy to help. Want to see it in a good home. Pete
  19. I offered 2000 and he had no objection. My wife on the other hand...... Hence me posting here!!!
×
×
  • Create New...