Adkat
-
Posts
168 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by Adkat
-
Mack quantum with 18 speed Eaton has by itself split down in top gear
Adkat replied to Gorilla's question in Mack Truck Q & A
Has it got a spin on air filter up in the rail somewhere behind the gearbox? The air line that runs into the filter/reg at the top rh rear of the box should come from the spin on if it has one. You can also pull the bottom off the filter reg and give it a clean out. -
TURBO HELP NEEDED: 91 E7350 Turbo part numbers
Adkat replied to HaabHauling's topic in Engine and Transmission
Looks like it's for a 350. Hope this helps
-
Good on ya mate, seen another lap around the sun! Have a cracking time🍻🍻
-
Tracked Down An Air Leak, Need Help ID'ing Part
Adkat replied to Grind's topic in Air Systems and Brakes
Hard to tell, but that looks like an SR-1 spring brake valve
-
@The Heinz can you check this out when you get a couple minutes. Let's try and figure out what's supposed to be in there, then we can work out what can be done with what you have.
-
C'mon Larry, it's cruel to tease us with the first 2 and hold off on part 3! But in all fairness, you've done a cracking job with the first 2, and the triplex as well. Adam
-
Is it some sort of cruise control throttle actuator?
-
Seems to be a common issue on here Bob
-
I'd be talking to a dealer, maybe @The Heinz could run the vin and work out what motor the truck came with. Dunno but wouldn't have thought an Etech would be in an 2006 model over there. Either way it should fit, just need to find the bolt on bits and pieces, should be plenty around at wrecking yards to piece it together
-
Well that explains why so many damn democrat voters look so haggard.
-
Hey Bob, dunno if they make them over in the USA, but these offsets look good on the steer
-
I wonder if any of these sorts of investments were discussed at the winter retreat of BMT Investor members in Monaco?
-
Right, well that wasn't the topic heading I expected to come across on Sunday night🤣🤣
-
Yep the volvtards over here really don't want you to buy anything from them, let alone sell you anything Mack. Dunno where your located, but most Truck line shops will be able to get 99% of what you need, even Renault bits and pieces. Way cheaper than Volmackud. Be careful going too far with the rear gearing. Most, if not all E7 Mack's I've come across run 4.65 in b double or 4.3 for single work. They just don't have the low down pull that the 15L cats and Cummins have to be geared like that. Hell even kenworths only get to 3.9 with 620hp up front. Just sayin.
-
So these junior personnel earn approx $2500 a month and then lose 20% of that to pay for their food, then get fed toast and beans. Any wonder recruitment is non existent. Easier to sit at home on welfare. It's a bloody disgrace. Just gives you that much more appreciation for all the serving men and women from every country when this is how our governments are treating the ones putting their lives on the line for all of us.
-
295/80/22.5 is a stretch on an 8.25 rim, definitely a 9" for a 315. May need to go with offset rims to give more clearance for the wider tires, and you'll need to check there's no fouling on steering box, pitman arm, drag link while turning,
-
This came through the email the other day. Thought you fellas might be interested in this https://powertorque.com.au/australias-first-mack-super-liner/
-
- 3
-
-
And rh mounted ecm below the eups, definitely early etech. Strange with the rocker setups. And over here only the later CCRS Etech 470 came with the wastegate turbo. Definitely a mongrel build, but if the bottom ends in good nick a great platform to build off. At least you'll have the vcm to go with it
-
Yep, life wouldn't be the same without all you've done here. Hope you're having a cracker of a day.🍻
-
G'day jervn4, looks like you've got an ASET engine, not an etech. We didn't get them here in Aus, but they were the start of the emissions engines. Reckon @Joey Mack will be able to steer you right
-
Maybe the Saab 900 is more your style Joey 😉
-
Help Identify this bellhousing
Adkat replied to Lmackattack's topic in Antique and Classic Mack Trucks General Discussion
I'd say you're on the money with it being an E6 housing.
-
"As an American tax payer, I don't want my dollars going towards this crap." 👏👏👏 Couldn't have said it better myself.
-
Yeah I was thinking the same Joey. Figured income tax would be federal, so it's gotta be some sorta tax on spending. Guess they don't worry that the illegals 💵 are funded by taxing/ taking jobs from the working class
-
Well if only I'd have know that all I need was a welder and a couple of bicycles to impress the girls in the neighbourhood!
BMT Forum Logo
