Joey Mack
-
Posts
7,711 -
Joined
-
Last visited
-
Days Won
198
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by Joey Mack
-
The sharp ears tells me they go back 40+ years. I dont know when the smooth ears came out.
-
Mech, thats where I remember the buzzer to be. on the back of the triangular gusset above the clutch pedal.. I do know that in the 90's RD models and newer that I have worked on, it's name was changed to a Multi Buzzer.. it was so loud when using turn signals, that all of the drivers in my fleet would un-plug them.. then I would plug them back in when they were in my shop for the next PM.. The DOT Man doesnt like it when they are un-plugged..
-
yep, That's what I get for not working on a 70's model Mack in decades.. Thanks JoeH.. I put that back in my brain..
-
Is the buzzer mounted to the triangular brace above the clutch pedal?
-
The old timer that taught me Mack stuff, showed me to clean the oarts with break clean, then use crazy glue to put the puzzle together. Then i was able to determine what was missing. Sometimes it helped to tell me where it came from.. Mech,, you remind me of him.. Earl Harnden... R.I.P.
-
There arent any sealing rings any more, like an E-9 would have. Good to see you here Mech... -
Glad you got it apart, yes, it looks like talk to text.. all good.
-
You can use your favorite pen. oil, i use Kroil or PB Blaster..
-
soak the joints with Kroil, the twist and tap with a dead blow..
-
Abandoned 2004 6 axle ch713 Allison trans.
Joey Mack replied to BobbyCTX's question in Mack Truck Q & A
2007 is not an E-7.. and if it is an actuall 2007, it is an MP... if it turns out to be a Mack engine, if it does not have the EGR valve and the huge turbo, then it is a replcement for the boat anchor you currently have. -
I truly understand..... My first wife had that diagnosis. It was Devistating.. Do the best you can to keep it together.. Jojo
-
all good buddy. you have a couple threads going, but its cool.. You are in need of answers.. as you can tell there is a bunch of us helping you steer the ship.. Jojo
-
if the center section is good.. RE-USE IT !! Volvo is proud of that part, and it may be on national backorder.. put eyes on it !!
-
is the foremans name Josh??
-
what kind of shape is your center exh. section? is it cracked behind the turbo port?
-
Looks like you got some good help.. 💪
-
There is some space below the axle. The bull gear is very close to the bottom if the sump, and that thick oil can allow the bullgear to pick up chunks and bring them up to the spur shaft .
-
Any chance the low air bulb is swapped with another bulb socket? Like the highbeam, and the high beams are on?
-
I cant remember, but when you find it, you can pull a wire off to see if the low air light goes out. If it does, you will need a normally closed pressure switch with an 80 PSI pop pressure.
-
Well, hopefully no pieces got into the differential inside the bull gear. Good luck..
-
Biden announces toughest emission rules on trucks
Joey Mack replied to kscarbel2's topic in Trucking News
Lots of people say that Obama is working the puppets strings. -
Well, you really need to pull the gear sets out. There will be chunks laying in the bottom. Where did the shaft snap? Did you drive a long time with it broken? I will post more after you post answers, pics of the axle will help, salvage yard axle just needs to be checked, look for sharp splines..
-
Check fuse 40 in the fuse box on the fire wall, top center below the wind sheilds . EECU fuse, 25 amps, clear in color.
-
I recently had to buy 4 deck dowels and a long butress bolt.. I spent 30 minutes (Behind the counter) showing the MACK parts guy how to find what I needed.. He was a good guy, just had no training on E-Tech engines.. The last series of MACK engines before the MP series.. It isnt like I was looking for parts for an AC Mack.. a frigging CH... E-Tech Engine By God !!!!
-
these are the 2 full gasket kit numbers minus head gaskets.. if this is still available, I would consider buying them.. I also posted the 20 bolt head gasket part number. is your's 20 bolt? the head gaskets are the only difference that I know of... I am by no means an END or E-6 guy.. This is just what is in my shop right now.. I know you are not this deep in the engine, just hoping these part numbers are good info for you, Jojo
BMT Forum Logo
