609albert
-
Posts
691 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by 609albert
-
on the chrome rails fxfymn on this site, set me up with a connection to get them, good quality and cheap.
-
try Cal Little 717-566-8973 he is in Hummelstown ,Pa. Also John Chambers 717-334-8709 Also try NAPA .I know they are hard to come by ,had to replace one on my Mack ,as I remember they are fine external thread. let us know how you find one
-
Welcome to the site, as you work on your truck make a list of parts you may need and post on the site,many parts are interchangeable with several manufactures especially trucks built during the war yrs. their is really a lot of guys here that have knowledge and locations for parts. good luck
-
I would put a used 237 Mack diesel in it if I was doing it
-
the exhaust manifold I think is actually 3 pieces pressed together. Matt did my '54 LS85 in 2011 ,he has all the equipment ,tools & parts to work on Macks.
-
I see you have the fenders off , radiator supports etc.,how far are you going to take it down?
-
looks like in very good condition, and a single axle ,is that more rare?
-
I have a 54 LS85 (semi-open cab) ,nice parade truck ,but not so nice when weather is bad, my next truck will have a Roof on it.
-
UPS also used some of this trucks, I have a neat model of one, used by several furniture companies also on the east coast.
-
nice looking Mack , I would agree it is E, in Pa. several rescue bodies where built by a co. called Harwick, known for their rounded body corners . Wyndwood (sprinfield twp) Pa .just had their 58 'B' mack restored last year ,it has a Harwick body and was built as a rescue with a pump on it .It really ahead of it's time
-
hope you keep it ,it looks to be in good shape and very rare , was the roof a Mack product
-
hey that for me ,shifting on the left....I'm left handed
-
fxfymn should be able to help you , he'll see your post ,just wait a little
-
Guys from Quakertown ,n.j. looking for their old 73 'R' Mack pumper /grumnem body ,last was sold to Stewart County fire rescue ,Tenn.in 2001. they would like to get back.
-
yarnell ,get me the part #,is it a NAPA or ? my 54 85L has 40K miles on it ,don't want to get stuck sometime on the road.thanks
-
What's up with this?
609albert replied to Superdog's topic in Exterior, Cab, Accessories and Detailing
by the looks of the building in the background I'd say it is in a out of the U.S.A. -
also a small hole to pull out
-
I made the new board 201/2'' wide to install & remove easier
-
my L has a nice piece of plywood that fits on the side brackets, several coats of varnish and a warning that it is Positive Ground. I'll post a photo if one of you guys tells me how to post.
-
thanks for the info Carl, we just finished an addition to the existing pole bldg. (actually the addition is larger, 42 x 60 ) we are going to insulate ceiling and walls and finish off and possible a heater ,that won't be done till the spring .
-
Any recommendations on winterizing the pump on my 'L', our garage is unheated and I like to keep the pump lubricated to keep seals etc.from drying out and prevent corrosion ,currently I put 12 gals. of RV antifreeze in it.thanks
-
Louie ,did you hit the big lottery?
-
B 61 cab removed and a question
609albert replied to eddeere's topic in Antique and Classic Mack Trucks General Discussion
I like your garage ,steel skin on inside ,is it insulated,heated? -
Also the C did not have the diamond plate on the front like that (had stainless steel panel, also signal lights not orginal to the C .looks like a nice truck.
-
also try cal little in Hummelstown pa. ,Also if you want to wait for the Spring Melt in Allentown pa.in april their are always some bells their.
BMT Forum Logo
