FBGNO Posted 15 hours ago Share Posted 15 hours ago Is there a conversion set up on the market to retrofit spring brake chambers to the rear drive axles of my 55 Mack LJSWX, or do I have to fabricate my own set up? Quote Link to comment https://www.bigmacktrucks.com/topic/76173-convert-to-spring-brake-chambers-rear-axles-55-ljswx/ Share on other sites More sharing options...
0 mechohaulic Posted 5 minutes ago Share Posted 5 minutes ago don't know of a "conversion set up". looking to go period correct , the spring brake set up was the addition on two chambers with rods connected to through shafts from outside frame to inside which rods connected to vehicle brake chambers, for safety and simplicity ; install a basic two chamber system such as todays units. depending on the clearance factor of chamber mounting. Quote Link to comment https://www.bigmacktrucks.com/topic/76173-convert-to-spring-brake-chambers-rear-axles-55-ljswx/#findComment-585952 Share on other sites More sharing options...
Question
FBGNO
Is there a conversion set up on the market to retrofit spring brake chambers to the rear drive axles of my 55 Mack LJSWX, or do I have to fabricate my own set up?
Link to comment
https://www.bigmacktrucks.com/topic/76173-convert-to-spring-brake-chambers-rear-axles-55-ljswx/Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.