RW613 Superliner rear crossmember

[FarnorthMN]

On 12/2/2025 at 1:47 PM, Vladislav said:

Yes, this crossmember is supposed to be on the rear. I have a similar one on the rear of my MH. With spicers at the sides and put with the dish up. Very probably you have a similar part as the cab support but I expect that to be a single beam. If that one is double like the one in the pics I'd like to see your cab air ride setup.

Good luck on the fix and future plans!

@Vladislav here are few pictures of the cab air ride crossmemeber I was talking about.  Also a picture of the 90L4551M for the muffler stack support rod 

[Vladislav]

21 hours ago, FarnorthMN said:

@Vladislav here are few pictures of the cab air ride crossmemeber I was talking about.  Also a picture of the 90L4551M for the muffler stack support rod 

Wow! Interesting.

I used to see a different setup on RW2.

[FarnorthMN]

4 hours ago, Vladislav said:

Wow! Interesting.

I used to see a different setup on RW2.

I guess who knows! someone could have put that together with the cross memeber on mine and used to have the back to back.  If thats the case they did a pretty good job 🤣🤣

[FarnorthMN]

Just wanted to give you guys and update. Ended up finding the back-to-back at Manders diesel,  had to look through the yard for some time but found one. Fabed up some spacer plates and turned out well. Thanks again@Geoff Weeks @kscarbel2 @BottleHauler84 @Vladislav for all your help. 

[Geoff Weeks]

Both my air start units came from Manders, also my aluminum air start tank to replace one of the steel ones that rusted. They have some interesting stuff sometimes.

[FarnorthMN]

1 hour ago, Geoff Weeks said:

Both my air start units came from Manders, also my aluminum air start tank to replace one of the steel ones that rusted. They have some interesting stuff sometimes.

yeah there are good guys to work with. I'm lucky enough to only live 20 min away.   I usually spend more time looking around at other stuff I dont need then what I went there for. 😂😂