Rick witt Posted 19 hours ago Share Posted 19 hours ago Gets stuck in high then you have to pull tower and bar into neutral Quote Link to comment https://www.bigmacktrucks.com/topic/75777-h-model-shifting-tower/ Share on other sites More sharing options...
Joey Mack Posted 18 hours ago Share Posted 18 hours ago Thats a pretty vague description of the issue. Do you pull the shift tower off the trans, or in the cab? Quote Link to comment https://www.bigmacktrucks.com/topic/75777-h-model-shifting-tower/#findComment-578879 Share on other sites More sharing options...
70mackMB Posted 18 hours ago Share Posted 18 hours ago Welcome to BMT Rick! Post some pictures of your truck so we will all know what you have! .....Hippy Quote Link to comment https://www.bigmacktrucks.com/topic/75777-h-model-shifting-tower/#findComment-578881 Share on other sites More sharing options...
Brocky Posted 18 hours ago Share Posted 18 hours ago Rick, from that short description it sound like worn forks or the small forks at the bottom of the shift lever are worn and jump out???? Next time you pull the tower take some good pictures of all of the above.. I had a 1959 Diamond T 921 Cab over that they told me would not go into reverse, turned out to be just an universal joint in the linkage.. I am sure some one here can help you better. 1 Quote Brocky Link to comment https://www.bigmacktrucks.com/topic/75777-h-model-shifting-tower/#findComment-578886 Share on other sites More sharing options...
Joey Mack Posted 18 hours ago Share Posted 18 hours ago Thats a pretty vague description if the issue. Do you pull the shift tower off the trans, or in the cab? Quote Link to comment https://www.bigmacktrucks.com/topic/75777-h-model-shifting-tower/#findComment-578888 Share on other sites More sharing options...
Joey Mack Posted 18 hours ago Share Posted 18 hours ago (edited) I was thinking about the joints as well.. a little bit of slop goes a long way Edited 5 hours ago by Joey Mack Incorrect info Quote Link to comment https://www.bigmacktrucks.com/topic/75777-h-model-shifting-tower/#findComment-578889 Share on other sites More sharing options...
1961H67 Posted 15 hours ago Share Posted 15 hours ago Yes, post some pictures, I have a 1958 H Model that I parted out if you need something that you can’t find. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/75777-h-model-shifting-tower/#findComment-578908 Share on other sites More sharing options...
steve s. Posted 7 hours ago Share Posted 7 hours ago The first question is what transmission do you have? Next question is which lever gets stuck in high? The H has no linkage for the shifters, just very long shift levers. Are your shift levers worn and sloppy? 2 Quote Link to comment https://www.bigmacktrucks.com/topic/75777-h-model-shifting-tower/#findComment-578911 Share on other sites More sharing options...
1961H67 Posted 5 hours ago Share Posted 5 hours ago Yes , it doesn’t take much slack in the trans for those long sticks to be very sloppy, They can hit the opening in the floor, I’ve had to heat them and bend,, I’ve also seen them get bent from lowering the cab . 2 Quote Link to comment https://www.bigmacktrucks.com/topic/75777-h-model-shifting-tower/#findComment-578918 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.