Blue Nile trucker Posted May 25, 2019 Share Posted May 25, 2019 I got CHN613 that has white smoke and takes a lots of oil and has no leak I’ve changed the whole head cuz there was oil in the manifold but still smokes and takes lot of oil not sure if it’s the turbo or the piston ring or something else. Thanks! Quote Link to comment Share on other sites More sharing options...
JoeH Posted May 25, 2019 Share Posted May 25, 2019 White smoke is usually antifreeze. Is your head gasket bad? Was it torqued down in the right sequence? Quote Link to comment Share on other sites More sharing options...
Blue Nile trucker Posted May 25, 2019 Author Share Posted May 25, 2019 42 minutes ago, JoeH said: White smoke is usually antifreeze. Is your head gasket bad? Was it torqued down in the right sequence? The head gasket is good and I did put new head gasket too but there is oil leaking from the turbo tho Quote Link to comment Share on other sites More sharing options...
mrsmackpaul Posted May 25, 2019 Share Posted May 25, 2019 Check for air in fuel White smoke means air in fuel Blue smoke means oil Paul Quote Link to comment Share on other sites More sharing options...
fjh Posted May 25, 2019 Share Posted May 25, 2019 Not really enough info in this topic here to give a good answer ! Do you have blo by puffing out the fill tube or vent while running! Is the engine firing on all cylinders ! when you changed the head which ports were wet maybe you have a bad injector! give us a few more clues may be able assist you better! Quote Link to comment Share on other sites More sharing options...
turckster Posted May 30, 2019 Share Posted May 30, 2019 Uses lots of oil and has white smoke.I'd say it's plum smooth wore out. At least with info provided. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.