Black71gp Posted December 8, 2015 Share Posted December 8, 2015 I have an 88 cm422, milliner style single axle dump, I need a few parts that I can not find at all, I found one place who has a parts truck but I have been trying to work with them for 5 months and getting no where. I need the wiper pivot assembly that goes through the firewall. Mine is all rusted and I can get it free so I have no wipers. Have to pick when I move equipment and watch the rain showers. I also need the rear two body mounts, possibly a few other odds and ends if I find a parts truck, speedo steering wheel, possibly air tanks. Wipers are the major importance part I need to get. Any ideas?? Quote Link to comment Share on other sites More sharing options...
carlotpilot Posted December 9, 2015 Share Posted December 9, 2015 post a picture of it some folks near me have some of those midliners sitting possibility Quote Link to comment Share on other sites More sharing options...
kscarbel2 Posted December 9, 2015 Share Posted December 9, 2015 The wiper pivot assembly was something we rarely sold, because it never failed.When you called the good folks at Watts Mack, did they say it was NLA? (no longer available).I know you can still buy it through Volvo's Renault Trucks brand in the global market. Quote Link to comment Share on other sites More sharing options...
Superdog Posted December 9, 2015 Share Posted December 9, 2015 I have a CS Midliner cab & chassis,no engine,trans.,or hood,other than missing 1 wiper arm,the cab is intact. $750 .I think it is a '94 or '95 Quote Link to comment Share on other sites More sharing options...
Black71gp Posted December 9, 2015 Author Share Posted December 9, 2015 Mine looks like this Quote Link to comment Share on other sites More sharing options...
Superdog Posted December 9, 2015 Share Posted December 9, 2015 I'm not very well versed on either those CM's or the Midliners to know what is interchangable,the cabs look the same,I think the only difference is the CM's had a heavier chassis and different engine,they were billed as being a "Baby 8"..They didn't seem to catch on and there were only 586 of them made. Quote Link to comment Share on other sites More sharing options...
MTMACK50 Posted March 10, 2016 Share Posted March 10, 2016 On 12/8/2015 at 4:04 PM, Black71gp said: I have an 88 cm422, milliner style single axle dump, I need a few parts that I can not find at all, I found one place who has a parts truck but I have been trying to work with them for 5 months and getting no where. I need the wiper pivot assembly that goes through the firewall. Mine is all rusted and I can get it free so I have no wipers. Have to pick when I move equipment and watch the rain showers. I also need the rear two body mounts, possibly a few other odds and ends if I find a parts truck, speedo steering wheel, possibly air tanks. Wipers are the major importance part I need to get. Any ideas?? Try this http://www.salamisisuzu.com/ Located in Boston,Ma. - I have these guys searching for some air line tubing for my 1991 CS300 . They deal in USED and NEW parts for Midliners and more . Call 617-442-1225 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.