Jump to content

Recommended Posts

I have a e-9 500hp 998 took apart for cam trouble. I took the lifters out to replace them and dealer could not get new ones. I found some good used ones and a new cam. The lifters I took out had a oil passage in the side but the used ones I found don't does anyone know why? or if there was an update?

Thanks in advance for any info!

Link to comment
Share on other sites

I can not copy and paste here for some reason but search for hillcrest cam grinding in little rock ark.I know some one who uses them and I have installd one cam for a friend from them. They can grind your own and plus reface your lifters.

glenn akers

Link to comment
Share on other sites

I went through this 2 years ago. All lifters are the same E6 E7 E9. Just updated and not cheap anymore. But when going to the new lifter you have to change push rods on either the exhaust or intake I cannot remember. The radius in the top of the new updated lifter is different. There is some service bulletins on this. I'm sure someone here can provide.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...