Bolser Clyde
-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by Bolser Clyde
-
When changing oil and filters I noticed primary fuel filter was only half full. What should I look at first. I can not find any external leaks and no fuel in oil.
-
86 superliner
Bolser Clyde replied to Bolser Clyde's topic in Exterior, Cab, Accessories and Detailing
I don't have any of it. I need to know were to cut hood and what goes were. Thanks for any input or pictures! -
Does anyone know were I can get external air breathers for a 86 superliner with E-9?
-
I need a set of external breathers for a 86' superliner
-
Thanks, I appreciate your help.
-
1989
-
I am looking for a fan drive kit for a mechanical E-7 v-belt pulley
-
I need a gray dash [ the big part that mounts to firewall to hold all other panels] for 86 superliner or r-model
-
I have a 89 superliner with a mechanical e-7 400. My turbo is going out , I can hear fins rubbing at shutdown. The truck has always ran very good, I am sure it has been turned up professionally. There are no tags or numbers on turbo. Does anyone have any recommendations for a good replacement turbo?
-
How do you check timing on an E-9 500 with ambach pump?
-
How do you check timing on E-9 with ambach pump?
-
I don't know much about the E-9 yet always had E-7's . How do you check timing or turn up the fuel. What do I have to do to get rid of puff limiter? The truck in the picture came from PA - Frank Szerba Jr. was on the door.
-
Is there anything cheap to do that will make my E-9 500 run better? Mine is bone stock with 210,000 miles ambach pump. I have it out of the truck now to fix oil leaks. Thanks in advance for any suggestions!
-
I bought the truck and they said it had engine trouble. I took it apart and found someone had rockers so tight they wore through tops of lifters and bent one push rod and wore a lobe off of the cam!
-
My lifters are trashed!
-
I have one for sale in ohio were are you?
-
I have a e-9 500hp 998 took apart for cam trouble. I took the lifters out to replace them and dealer could not get new ones. I found some good used ones and a new cam. The lifters I took out had a oil passage in the side but the used ones I found don't does anyone know why? or if there was an update? Thanks in advance for any info!
-
how ddo I contact him?
-
I need push rods, cam, lifters for E-9 500. Good used or new. Any info on were to get these parts would be helpful!
-
pounds of freon in superliner?
Bolser Clyde replied to Bolser Clyde's topic in Exterior, Cab, Accessories and Detailing
Thanks to all for the info! -
Does anyone know how many pounds of 134 to put in a superliner? Everything is factory equipment, no bunk my tag is gone.
BMT Forum Logo
