MACKS Posted May 24, 2014 Share Posted May 24, 2014 This might be a dumb question but here goes anyway, before I do an alignment on my 96 cl the tie rod end on the passenger side in not screwed into the tie rod as far as the one on the drivers side, there is about 3/4 inch difference, will this effect the alignment even after I adjust the tie rod for proper toe in. Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted May 24, 2014 Share Posted May 24, 2014 no Quote glenn akers Link to comment Share on other sites More sharing options...
Td713001033 Posted May 24, 2014 Share Posted May 24, 2014 I would take it off the truck and even them up . not sure how long the threaded part is but you need it to be in far enough so the pinch bolt and clamp can work properly. save going on a wild ride for the amusement park 1 Quote Link to comment Share on other sites More sharing options...
gearhead204 Posted May 24, 2014 Share Posted May 24, 2014 for safety get it even !for align. don't matter. Quote Link to comment Share on other sites More sharing options...
MACKS Posted May 24, 2014 Author Share Posted May 24, 2014 Thanks for the response,all even now,toe in set. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.