richard-b61 Posted February 5, 2014 Share Posted February 5, 2014 Hey guys, I'm restoring a 1961 B61 and will eventully need to do some work on the floor boards. I know the center floor boards are removable, but since this is my first restoration, I wasn't sure if the 2 outside floor baords next to the doors are removable or are welded in place. Quote Link to comment Share on other sites More sharing options...
Superdog Posted February 5, 2014 Share Posted February 5, 2014 If I remember right there are a total of 6 removable pieces to the floorboard,the big main center piece,L frt corner,R frt corner,2 pieces around the steering column and clutch pedal,and the crossbrace.been a few years since I had one clear out,but I think that's right Quote Link to comment Share on other sites More sharing options...
Popular Post Freightrain Posted February 5, 2014 Popular Post Share Posted February 5, 2014 The main center panel is the only removable piece. The rest is welded in solid.I added a piece of 1" sq tubing to support the front seat brackets. Since I could not put any rolls in the metal to make it more rigid.I put the floor back in with three pieces, kinda like the factory did. Plus I had to be able to slip them around under the lip for the removable panel. I remade that lip also.Looks factory fresh enough for me. 3 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
HarryS Posted February 5, 2014 Share Posted February 5, 2014 Will the transmission top cover come off with just removing the panels of the floorboard? It looks like there is very little clearance between it and the cross support. Quote Link to comment Share on other sites More sharing options...
Freightrain Posted February 5, 2014 Share Posted February 5, 2014 I highly doubt it. Even if you remove the shifter towers, I don't think there is enough room to raise the lids and get the shift forks out without running into the bottom of the floor. Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
HarryS Posted February 6, 2014 Share Posted February 6, 2014 That's kind of what I thought. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.