WANT TO BUY OR TRADE air to air adapter pipes E9 5MD4313M (x2)

[bobo]

I'm looking for a left and a right of the air pipe connectors from air to air to the pipe. I think they were stock on E9 CL's? let me know!! bobo

[rsb502]

They are different from CL,RW, MH and E6, E7 and E9's but all the E9 elbows are similar, what do you need them to fit?

[bobo]

my 89 rw with e9. when i replaced my air to air, I couldnt get a direct replacement, the cooler i put on was for a CL with an E9 i think? but the one in the pic looks tobe the right one for driver side? bobo

[bobo]

  On 1/2/2014 at 10:04 PM, bobo said:

I'm looking for a left and a right of the air pipe connectors from air to air to the pipe. I think they were stock on E9 CL's? let me know!! bobo

LEFT AIR PIPE.jpg

The part # Im looking for is 5MD4313M (x2) BOBO

[gearhead204]

bobo so do you need the o ring style or barbed push ons ? which turbo do you have small like 2 1/2" discharge or 4"

my 89 superliner e9 was all push on but the parts house kept trying to sell me a o ring style.

the company is shield radiator ph. 866 826 1099 6-4 pst

[bobo]

just push on, on the motor end they are Oring. the old CMCAC is superceded to the CL style built with a 3406 or E9. Making my stock pipes too short and need the adapter pipe to fit. I made extension pipes with rubber bellows on both ends, but they blow off due to the vibrations of going down the road! so...I need the proper pipes

the chicago warehouse has 10, but they want 180$ apiece!!!!!

[rsb502]

I had the original early 85 style on mine and had to go to the new style like in your pic since the silicone high pressure elbows weren't available. I'll make a call and see if I can find a set, those elbows use an oring at the cooler and slip on the other end. Youll have to get 4" silicone couplers to go with them. Are your charge air pipes 4", the early were a little different and it makes it hard to interchange.

[gearhead204]

if you can return the cooler I just bought one in aug. push on style ,they also had the o ring style don't know if this helps