WANT TO BUY B model passenger seat needed! *FOUND*

[Bigdogtrucker]

Looking for a passenger seat for my B75!CT/MA area

[Jamied625]

is it the bench or single seat??

Edited April 3, 2012 by Jamied625

[Superdog]

_{If you can't find one close,I have several.}

[Bigdogtrucker]

I belive it would be the bench,frames about 31" wide.

[Jamied625]

i have two to choose from and the vinyl or what ever the covering is, is pretty decent

[ThaddeusW]

Well if you wanted to be creative and save a little bread all you need is plywood, some thick foam and cloth. Cut a board to match the frame and cut the foam to form the seat. Pre-drill the mounting holes and stick carriage bolts through them. Glue the foam to the wood and staple the cloth to the boards underside keeping it taught. Bolt the seat to the frame. Probably not too comfortable for long trips but its better than a bare frame.

I have done a ton of padded railings and other padding so its not too hard. I would like to try my hand at making custom upholstery one of these days.

[Diesel Duke]

I've got a few. Came out of some 1950s B 61s that I bought. Previous owner took them out when the trucks were new and put them in the shop. The condition is good original with no rips. b61macks@yahoo.com

Mike