speweik Posted November 29, 2011 Share Posted November 29, 2011 I recently acquired a '52 LF which needs some cab work. The lower back of the cab is rotted out pretty bad, as are the lower door posts. Although I am new to Macks, the design of the lower cab rear leads me to believe this is a common problem. So, my questions: 1) does anyone make replacement cab backs for the LF, and 2) is the LF cab the same as any other models (from some pictures I have seen, it looks similar to the A model). Thanks in advance!! Corey Quote Link to comment Share on other sites More sharing options...
umodelnut Posted November 29, 2011 Share Posted November 29, 2011 http://www.macktrucks.com/default.aspx?pageid=40here is a link to the mack website and go to the bottom of the page and click on part suppliers for old trucks. i saw a guy in texas on there that said b and l model parts vinny Quote Link to comment Share on other sites More sharing options...
speweik Posted November 30, 2011 Author Share Posted November 30, 2011 Thanks, Vinny. I'll check that out. Fortunately, with the relatively straight lines of the L model cab, it shouldn't be too hard for even an old farmer like me to fabricate replacement panels. Still wondering, though, if the L cab is the same as any other model.... Quote Link to comment Share on other sites More sharing options...
Superdog Posted November 30, 2011 Share Posted November 30, 2011 There was someone that was reproducing back panels and floor sills for the L cab,he used to advertise in Wheels of Time & Double clutch,been quite awhile back,but maybe someone has his contact info. Quote Link to comment Share on other sites More sharing options...
39 Baby Mack Posted November 30, 2011 Share Posted November 30, 2011 The L model was an option on some B models, and was basically the same cab used on a C modelRon Quote Link to comment Share on other sites More sharing options...
39 Baby Mack Posted November 30, 2011 Share Posted November 30, 2011 The L model cab was an option on some B models, and was basically the same cab used on the C model.Ron Quote Link to comment Share on other sites More sharing options...
speweik Posted December 1, 2011 Author Share Posted December 1, 2011 There was someone that was reproducing back panels and floor sills for the L cab,he used to advertise in Wheels of Time & Double clutch,been quite awhile back,but maybe someone has his contact info.Thanks, Ron. Hope someone might have an old issue with that info.... Quote Link to comment Share on other sites More sharing options...
burnin oil Posted December 6, 2011 Share Posted December 6, 2011 If so post it up. I am going to start mine here soon. Quote Link to comment Share on other sites More sharing options...
Joe Ditchkus Posted December 6, 2011 Share Posted December 6, 2011 I bought a set of floor sils and cab back from them at ATHS Syracuse Show. I cannot remember his name,he was from Upstate, New York. Joe D. 1 Quote Link to comment Share on other sites More sharing options...
speweik Posted December 6, 2011 Author Share Posted December 6, 2011 I bought a set of floor sils and cab back from them at ATHS Syracuse Show. I cannot remember his name,he was from Upstate, New York. Joe D.Do you remember if it was an individual or a company? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.