leversole Posted August 14, 2011 Share Posted August 14, 2011 Going to be ordering vent and door window glass from Watts...Has anyone replaced these? What holds the glass in place?What do you use to "mount" the new glass in the frame/regulator?Thanks Quote Link to comment Share on other sites More sharing options...
mowerman Posted August 14, 2011 Share Posted August 14, 2011 Going to be ordering vent and door window glass from Watts...Has anyone replaced these? What holds the glass in place?What do you use to "mount" the new glass in the frame/regulator?Thanksheh,,good luck my friend,,,buy plenty beer,,glass sits in a thin layer of rubber insulation,,they probably have it at watts,if they dont try any glass shop,,install with soap,n water,,tap glass into rubber,,if in doubt let the glass shop put the glass in the frames,,,dont forget to grease n oil all moving parts to window regulater,,while you got it out..have a ball.lol.bob 1 Quote Link to comment Share on other sites More sharing options...
Maddog13407 Posted August 15, 2011 Share Posted August 15, 2011 just take the old vent windows and door glass with channel atteched to a glass shop. they will cut the new glass for you and glue the window channel back on the bottom of the door glass and into the vent window frames with urethane. ~Matt 1 Quote Link to comment Share on other sites More sharing options...
Mike Posted August 15, 2011 Share Posted August 15, 2011 I am at this stage also. But will have the channels chromed first before I put expensive parts back together on top of now rusty chrome parts. Yes Barry and Tracy sell all the parts you will need.Regardsmike 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.