Jump to content

IH Farms 2

Bulldog
  • Posts

    262
  • Joined

  • Last visited

Everything posted by IH Farms 2

  1. I'd like the visor off the red truck if your interested in taking it off. Not sure what shipping would cost but if you have PayPal I could pay you thru that
  2. They look like flat mount. Got the starter changed today now I'll be able to start working on a couple other things and I'll pull the suspension apart and see if we can get stuff matched up
  3. Pretty sure they are flat I'd have to look when I get home
  4. Looking for an online source for this the rubber ones that go in the round tube that the air bags sit on. The truck I just bought they don't look the greatest figure before it needs to earn money might as well fix it now. Also if there is an online source for the torque rod that goes on top of the axle to the X member Thanks in advance
  5. If I'm around Walcott when the show is going on I'm sure I'll be stopping in
  6. It's a nine speed got a couple wiring issues to take care of and the speedo not working right and the starter craped out in Minooka il on way home had to pull start it I'll post pictures as soon as I figure out how too off of my phone
  7. B61mack Just want to say thank for the heads up on the truck at sterling express I bought it today and it is now sitting in my driveway have to fix a couple things then I'm going to put it to work hauling grain and steel.
  8. Thanks for the pictures I'll get a hold of you if what I'm working on for Saturday falls thru
  9. Thanks a lot should be picking it up Saturday going to bring the gps to know how fast I'm going and will let you know when I figure out the culprit most likely I'm thinking the adapter because it has a newer speedo in it only 91k according to it guy says whole truck has 600k and it looks like it's been well cared for
  10. Ok. So it's a good possibility that the cable is just broke I'll look into it going to pick it up this Saturday at least that's the plan as of right now
  11. I'M looking for possible causes for it not working on a truck I'm looking at to get an idea what I'm getting into. Is it a cable or sensor or wiring? It has a mack 9sp Thanks
  12. I'd be interested if it had a larger bunk or had access to one. I can figure out how to shorten it some.
  13. I'm still looking for a truck if anyone knows of one
  14. Ok thanks didn't know if there was anything else in there
  15. Could someone decode this for me? Thanks in advance 1M2AY04C7JM004957
  16. Around here that is referred to as Detroit disease when the 2 part piston comes apart and normally windows the block. They are pretty good up until that point
  17. No salt other than what would be picked up driving in the fine Midwest winter I would assume would be a good idea to keep the frame painted if I ended up with it
  18. It looks clean from pictures but as you know pictures don't always tell the truth it'd be used to haul steel and pull a hopper bottom
  19. Are they any good did they have issues with them? Found an 88 superliner with one that I'm interested in.
  20. Looking for any aftermarket supplier for torque rods or bushings for an 88 superliner mack rears on neway air
  21. Yeah I taught it didn't look the right. Doesn't look terrible
  22. Saw that one two even comes with good sleeper and doors
×
×
  • Create New...