cruiseliner64 Posted December 18 Share Posted December 18 Hi guys,The parking brake on the Cruiseliner wont release.Iv checked and rechecked that I have any pipe work that was moved during painting connected properly(took loads of pics as well as marking them)What I have found is Iv no air at all up at the parking brake control valve on the dash.Im wondering where the valve is fed from or any other ideas you might have..... Paul Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/ Share on other sites More sharing options...
Geoff Weeks Posted December 18 Share Posted December 18 Do both air tanks (primary and secondary) have pressure? Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/#findComment-587368 Share on other sites More sharing options...
Geoff Weeks Posted December 18 Share Posted December 18 What type of valving does the truck have, a multi function valve with both red and yellow knobs or individual buttons ? Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/#findComment-587369 Share on other sites More sharing options...
cruiseliner64 Posted December 18 Author Share Posted December 18 Yes all tanks have full pressure but the parking brake is a europian type lever with 3 pipes.As I remember one is a supply pipe and should have air at all tines the other pipes direct that air to valves to release or apply the parking brake depending on lever position.I was wondering where that air is supplied to the lever comes from.The pipes are not colour coded and will require a lot of work to follow them but if I have to I will do it.The dash would need to be partly removed a job Id rather not do this side of Christmas. Paul Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/#findComment-587376 Share on other sites More sharing options...
Geoff Weeks Posted December 18 Share Posted December 18 Ahh, well I don't have a clue on how it is done over there. The British buses used a mechanical hand brake and the Austrian were similar to the US in having a button that pops out on loss of pressure. Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/#findComment-587377 Share on other sites More sharing options...
cruiseliner64 Posted December 18 Author Share Posted December 18 Thats a pity but many thanks for the replys Paul Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/#findComment-587378 Share on other sites More sharing options...
Geoff Weeks Posted December 18 Share Posted December 18 If I had to guess I would say the three are supply, line to brakes and exhaust line to outside the cab. here in the states, the same supply to the trailer supply button is also used for parking brake release Multi fuction valves get a supply from both the primary and secondary air system. But I have no idea how it is done in other parts of the world. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/#findComment-587387 Share on other sites More sharing options...
cruiseliner64 Posted 11 hours ago Author Share Posted 11 hours ago I meant to come back and report I found the problem.It turned out to be the valve in the picture which was stuffed with debris...Im thinking it was connected to the air pressure problem....... Paul 1 Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/#findComment-587820 Share on other sites More sharing options...
mrsmackpaul Posted 10 hours ago Share Posted 10 hours ago Well I have no good answers as to we're that starts or finishes I have would expect that is a pressure regulator valve and from memory,the only ones I recall seeing are on the transmission for the range change I wonder if it is a built in safety feature that won't allow the brakes to release unless you have enough air for the transmission?? But I have no idea at all Paul Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/#findComment-587823 Share on other sites More sharing options...
cruiseliner64 Posted 2 hours ago Author Share Posted 2 hours ago Yes Paul its a pressure regulator.I know the picture isnt great but the two air tanks in the pic are connected through this valve.the tank on the right feeds air to the tank below the valve.This tank is directly connected to the parking brake lever.I dont have air pressure test equipment but both gauges on the dash showed full air pressure.I removed enough of the dash to follow the three pipes from the lever and found one went to the parking brake control valve on the frame,one went to the trailer brake control and one went to this tank which had no air in it.The only supply connection this tank has is through this pressure regulator.I removed it cleaned it and now everything works perfect..... Paul Quote Link to comment https://www.bigmacktrucks.com/topic/76244-more-air-problems/#findComment-587829 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.