Jizzo17 Posted 5 hours ago Share Posted 5 hours ago (edited) I was hauling gravel yesterday in my 85 r model and under load 4th gear kept popping out when accelerating. I could apply just a few pounds of pressure to the gear shift lever towards me and it would stay in like normal but if I held it forward it would keep trying to kick out. Is there an adjustment that can be made to the linkage that will fix this or am I going to lose 4th soon? Edited 5 hours ago by Jizzo17 Quote Link to comment https://www.bigmacktrucks.com/topic/75785-mack-5-speed/ Share on other sites More sharing options...
Joey Mack Posted 4 hours ago Share Posted 4 hours ago Well, i dont know of an adjustment. Unfortunately you will need to pull the main floor pan to get the top cover off to inspect the forks, and rails , and look at the clutching teeth on the 4th-5th sliding clutch. Is this a twin stick or do you have a blue range button on the shift knob (T-2070)? Or just a straight 5 spd.? Quote Link to comment https://www.bigmacktrucks.com/topic/75785-mack-5-speed/#findComment-579012 Share on other sites More sharing options...
Jizzo17 Posted 4 hours ago Author Share Posted 4 hours ago (edited) It is just a straight 5 speed. It won’t do it all the time. There is just a range of engine rpm and travel speed that it wants to pop out. Which is very close to the rev match to float into and out of gear. Edited 4 hours ago by Jizzo17 Quote Link to comment https://www.bigmacktrucks.com/topic/75785-mack-5-speed/#findComment-579013 Share on other sites More sharing options...
BOBWhite Posted 44 minutes ago Share Posted 44 minutes ago I've heard a bad throughout/input shaft bearing can do weird stuff like that too. Pulling the transmission top cover off first like Joey said seems to be the best way forward. -Good luck Quote Link to comment https://www.bigmacktrucks.com/topic/75785-mack-5-speed/#findComment-579033 Share on other sites More sharing options...
mowerman Posted 30 minutes ago Share Posted 30 minutes ago lets hope thats all it is,,,,,i also believe its possible Quote Link to comment https://www.bigmacktrucks.com/topic/75785-mack-5-speed/#findComment-579039 Share on other sites More sharing options...
mowerman Posted 28 minutes ago Share Posted 28 minutes ago im thinking just a loose fork,,,i think the forks are held in with a set screw,,good luck Quote Link to comment https://www.bigmacktrucks.com/topic/75785-mack-5-speed/#findComment-579040 Share on other sites More sharing options...
Joey Mack Posted 12 minutes ago Share Posted 12 minutes ago If it turns out to be the sliding clutch. You dont have to take the whole tranny apart. It can be done through the input shaft hole Quote Link to comment https://www.bigmacktrucks.com/topic/75785-mack-5-speed/#findComment-579050 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.