Jump to content

Recommended Posts

Depends on how bad the bores are, It is dry lined engine so as long as any damage hasn't penetrated the liner into the block, it should be rebuild able. 

I've got some used pistons that don't look bad, and it will need at least one rod. Rod could be removed from the bottom with the head in place!

The effected rod big end looks fine, both crank and bearing shells.

Unit came with a top end gasket kit, another new set of main bearings, and assorted loose gaskets.

Had it running long enough to verify the generator it was attached to works, so I know it is worth putting a little into it.

Kubota's are tough little engines!

  • Like 2
Link to comment
https://www.bigmacktrucks.com/topic/75495-not-a-truck-but/#findComment-575248
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...