Jump to content

Recommended Posts

I did not take a picture of the parking brake on my B20 before I took it apart. I had the band relined by Specialty Brake in Florida. They did a nice job. Now I am putting it back and cannot figure it out. Does anybody have a picture of how it goes back together? I am at a loss!

Link to comment
https://www.bigmacktrucks.com/topic/75095-need-help-parking-brake-b20/
Share on other sites

oh well, i was going to suggest upgrading to dual chamber brake pots for air parking brake......if you had air brakes.

  • Like 1

when you are up to your armpits in alligators,

it is hard to remember you only came in to drain the swamp..

With good lining (his is new) and proper adjustment, they do fairly well, not as good as "tru-stop" but can lock the rear wheels, just hard on driveshafts and U joints. if you apply while moving.

  • Like 2

I was refering to shock loads where the wheels may lock intermittently, However, I don't know of many engines that will spin the rear wheels of a truck at 20 mph on pavement either, so I don't think you assumptions are correct.

Edited by Geoff Weeks
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...