Jump to content

B61 bumper not level


Recommended Posts

The front bumper(extended) on my truck isn`t level.There`s no sign of anything being bent or damaged.Is there a provision for adjustment,or is something else the cause,eg,frame tweak or suspension? Thanks.

Link to comment
Share on other sites

If you think the bumper, bumper to frame extensions and the frame are all straight, I would look to the front radiator mount as the next point to check. There are two rubber mounts in there that support the entire front clip. They are on the bottom of the radiator support frame to which everything mounts and bears down on. If one has failed it can throw the whole front end off. You can use the same rubber mounts for the cab and transmission there. The originals were slightly different as the back side was cupped and made for a softer mount for the radiator. There's less weight there than on the cab or transmission. You can also shim those mounts with large fender washers to adjust if some thing is bent. Pctures would help to see where your alignment is off, as we're all guessing where things are off.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...