Mack superdog Posted October 12, 2022 Share Posted October 12, 2022 Does anyone have a vin number off of a ch that came factory with a cable throttle I’m switching my CL from air throttle to cable but need the cable foot pedal figured I’d see if Mack can get one yet before I make my own Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/ Share on other sites More sharing options...
Mackpro Posted October 12, 2022 Share Posted October 12, 2022 You have a E6 or E7 engine? Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511683 Share on other sites More sharing options...
fjh Posted October 12, 2022 Share Posted October 12, 2022 On 10/12/2022 at 4:06 PM, Mackpro said: You have a E6 or E7 engine? Expand Pro he likely has a V8 these air throttles are obsolete! I is think he is trying to find an alternative! Linkage from a CH may work! with a few Mods! specially at the engine end! I believe that a set up from an earlier superliner would be beter! Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511684 Share on other sites More sharing options...
Mackpro Posted October 12, 2022 Share Posted October 12, 2022 Ch613- 002177 E6 with what I believe has an American Bosch pump on it . Ch613-003377 E7 with a Robert Bosch pump . Originally they used different throttle cable part numbers . Now it goes to the same one 25162402 and plenty of stock out there. Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511685 Share on other sites More sharing options...
Mackpro Posted October 12, 2022 Share Posted October 12, 2022 On 10/12/2022 at 4:20 PM, fjh said: Pro he likely has a V8 these air throttles are obsolete! I is think he is trying to find an alternative! Linkage from a CH may work! with a few Mods! specially at the engine end! Expand I gotcha Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511686 Share on other sites More sharing options...
Mackpro Posted October 12, 2022 Share Posted October 12, 2022 The original part numbers both show 85” long cables . I know they made all different lengths of throttle cables Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511687 Share on other sites More sharing options...
Mack superdog Posted October 12, 2022 Author Share Posted October 12, 2022 Yes I’m swapping it in my e9 I’m going to use a superliner cable and copy the bracket on the intake off my dads truck just need the throttle pedal Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511688 Share on other sites More sharing options...
Mack superdog Posted October 12, 2022 Author Share Posted October 12, 2022 On 10/12/2022 at 4:21 PM, Mackpro said: Ch613- 002177 E6 with what I believe has an American Bosch pump on it . Ch613-003377 E7 with a Robert Bosch pump . Originally they used different throttle cable part numbers . Now it goes to the same one 25162402 and plenty of stock out there. Expand Are those the vins of trucks that had cable throttles ? Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511689 Share on other sites More sharing options...
Mack superdog Posted October 12, 2022 Author Share Posted October 12, 2022 On 10/12/2022 at 4:20 PM, fjh said: Pro he likely has a V8 these air throttles are obsolete! I is think he is trying to find an alternative! Linkage from a CH may work! with a few Mods! specially at the engine end! I believe that a set up from an earlier superliner would be beter! Expand I’d like to do linkage but that will be to involved plus I don’t have to much room to work with so i think cable will be my best bet 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511690 Share on other sites More sharing options...
Mackpro Posted October 12, 2022 Share Posted October 12, 2022 On 10/12/2022 at 4:47 PM, Mack superdog said: Are those the vins of trucks that had cable throttles ? Expand Yes , manual pump with cable throttle Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511694 Share on other sites More sharing options...
Mack superdog Posted October 12, 2022 Author Share Posted October 12, 2022 On 10/12/2022 at 5:09 PM, Mackpro said: Yes , manual pump with cable throttle Expand Okay thank you I’m gonna see if my dealer can get me anything for it yet Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511695 Share on other sites More sharing options...
Mackpro Posted October 12, 2022 Share Posted October 12, 2022 The original part numbers for those 2 throttle cables were 27RC353P85 and 27RC340P85, the number after the P is the length in inches. They make different lengths just different P numbers. These 2 cables were replaced by the 25162402 as I said above. Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511696 Share on other sites More sharing options...
Mackpro Posted October 12, 2022 Share Posted October 12, 2022 On 10/12/2022 at 5:12 PM, Mack superdog said: Okay thank you I’m gonna see if my dealer can get me anything for it yet Expand The cable was available but as far as all the other cab parts for this set up its hard to say what’s available Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511697 Share on other sites More sharing options...
Mack superdog Posted October 12, 2022 Author Share Posted October 12, 2022 On 10/12/2022 at 5:30 PM, Mackpro said: The cable was available but as far as all the other cab parts for this set up its hard to say what’s available Expand I called he said to come down and look he thinks he has a pedal that will work 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511701 Share on other sites More sharing options...
Mackpro Posted October 12, 2022 Share Posted October 12, 2022 On 10/12/2022 at 6:26 PM, Mack superdog said: I called he said to come down and look he thinks he has a pedal that will work Expand That’s good Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-511702 Share on other sites More sharing options...
Dirtymilkman Posted October 16, 2022 Share Posted October 16, 2022 On 10/12/2022 at 6:26 PM, Mack superdog said: I called he said to come down and look he thinks he has a pedal that will work Expand I have a '90 ch with an e6 that has the cable throttle. I removed the factory pedal and put in a setup that is made for hot rods. This way it's closer to the firewall and it's suspended so there's nothing touching the floor. Works excellent and is easier to push. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-512216 Share on other sites More sharing options...
Mack superdog Posted October 18, 2022 Author Share Posted October 18, 2022 On 10/16/2022 at 3:37 PM, Dirtymilkman said: I have a '90 ch with an e6 that has the cable throttle. I removed the factory pedal and put in a setup that is made for hot rods. This way it's closer to the firewall and it's suspended so there's nothing touching the floor. Works excellent and is easier to push. Expand Can I see a picture of how yours looks and a link where to get one 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-512404 Share on other sites More sharing options...
Dirtymilkman Posted October 20, 2022 Share Posted October 20, 2022 On 10/18/2022 at 2:25 PM, Mack superdog said: Can I see a picture of how yours looks and a link where to get one Expand I will try tonight when I get home Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-513029 Share on other sites More sharing options...
Mack superdog Posted October 20, 2022 Author Share Posted October 20, 2022 On 10/20/2022 at 10:46 AM, Dirtymilkman said: I will try tonight when I get home Expand Okay thank you Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-513045 Share on other sites More sharing options...
fjh Posted October 26, 2022 Share Posted October 26, 2022 On 10/18/2022 at 2:25 PM, Mack superdog said: Can I see a picture of how yours looks and a link where to get one Expand So I don't know how far you are along on this project but check out Amazon for your cable and bits for this project! Im currently working on an old dodge 12 valve hand throttle set up and found some use full stuff here for the project! 1 Quote Link to comment https://www.bigmacktrucks.com/topic/70555-cl-air-throttle/#findComment-513574 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.