Joey Mack Posted April 30, 2020 Share Posted April 30, 2020 Hello, My name is Joe Ronzo. This is my first post ever, I look forward to seeing this in action.... I am looking for a gasket kit for the transmission I am building, I also need the 4th-5th sliding clutch. Thank you Jojo.. Quote Link to comment Share on other sites More sharing options...
j hancock Posted April 30, 2020 Share Posted April 30, 2020 The gaskets will be a DIY project at this point. Most forgo paper or cork gaskets and use RTV gasket maker. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Joey Mack Posted April 30, 2020 Author Share Posted April 30, 2020 I figured that is the case. I just wanted to try this forum. Thank you for the info. I did try to find gasket paper that is large enough to cover the rear case area and have found nothing. Now if I can just find the sliding clutch for 4th-5th... "Live Free or Die" Quote Link to comment Share on other sites More sharing options...
j hancock Posted April 30, 2020 Share Posted April 30, 2020 Large gasket sheets are available for DIY use. Check out McMaster-Carr. https://www.mcmaster.com/gasket-sheets Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
KKERGALL Posted April 30, 2020 Share Posted April 30, 2020 Do you have the transmission number stamped into main case 11KBA and or number of clutch that you need. Rich Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted May 1, 2020 Author Share Posted May 1, 2020 yes sir.The no. is.. 11KBA5288BP1... The Mack Gasket kit # is: 127SH17C... unfortunately , my local "Mack" dealership doesnt give a damn about real Macks... I do have a gasket parts list breakdown, but it does not tell me the positions of the gaskets. the sliding clutch no. is:320KB261.. thank you for responding.. Jojo... Quote Link to comment Share on other sites More sharing options...
KKERGALL Posted May 2, 2020 Share Posted May 2, 2020 Ok, give me some time I might be able to get most gaskets but I will get back to you. Rich Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted May 3, 2020 Author Share Posted May 3, 2020 Thanks again.Jojo 1 Quote Link to comment Share on other sites More sharing options...
KKERGALL Posted May 4, 2020 Share Posted May 4, 2020 Ok, wrote all the gasket part numbers down now just have to catch him at his place I will update you. Rich Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted May 9, 2020 Author Share Posted May 9, 2020 Thank you very much. I'm sorry I posted late.Iv'e been busy..Jojo.. Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted May 21, 2020 Author Share Posted May 21, 2020 Hello,Rich...Thank you for your interest. I found the parts I need.. I appreciate your help. Mabey someday I will help you..Jojo.. Quote Link to comment Share on other sites More sharing options...
KKERGALL Posted May 21, 2020 Share Posted May 21, 2020 Ok, he did not have much, Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted May 21, 2020 Author Share Posted May 21, 2020 I bet... I called many places in the U.S. to find parts. Of course these machines that we love are phased out.. Thanks again for you"re interest.. Jojo 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.