Ditchdiggerjcf Posted April 23, 2020 Share Posted April 23, 2020 If I cover the firewall with dynamat, what do I cover the dynamat with that looks nice? Quote Link to comment Share on other sites More sharing options...
66dc75 Posted April 24, 2020 Share Posted April 24, 2020 https://www.amazon.com/gp/product/B07LH5YH4R/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 1 Quote Link to comment Share on other sites More sharing options...
Timmyb Posted April 24, 2020 Share Posted April 24, 2020 I’ve thought about this too. I was going to simply paint mine with bed liner with a roller to get a textured look. Should be hard wearing too. Quote Link to comment Share on other sites More sharing options...
Ditchdiggerjcf Posted April 24, 2020 Author Share Posted April 24, 2020 Glue it to the dynamat? Quote Link to comment Share on other sites More sharing options...
66dc75 Posted April 24, 2020 Share Posted April 24, 2020 6 hours ago, Ditchdiggerjcf said: Glue it to the dynamat? Yup 3m contact cement, there is a thin plastic backer on the material that works well with the glue. Quote Link to comment Share on other sites More sharing options...
Vladislav Posted April 28, 2020 Share Posted April 28, 2020 My Canadian R had a carpet on the floor and the inner side of the firewall was also carpeted. The vertical part was attached to the sheet metal by steel clipses. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
Ditchdiggerjcf Posted April 28, 2020 Author Share Posted April 28, 2020 Yes, there are clips holding up the firewall cover on my RL. I don't know if they can be reused. I have not gotten that far. Quote Link to comment Share on other sites More sharing options...
Ditchdiggerjcf Posted June 4, 2020 Author Share Posted June 4, 2020 How do you get the little keepers that hold the firewall insulation loose? Are they reuseable? Will dynamat stick to the firewall or do I have to sand it smooth so it will stick? Quote Link to comment Share on other sites More sharing options...
Ditchdiggerjcf Posted June 4, 2020 Author Share Posted June 4, 2020 Ttt I need some help with this. I am running out of time to get these trucks ready to go. Quote Link to comment Share on other sites More sharing options...
66dc75 Posted June 5, 2020 Share Posted June 5, 2020 The plastic buttons that held what was left of my firewall insulation broke off when I pried them out. You will nedd to clean up the firewall and probably hit it with a coat of spray paint. The dynamat seems to stick to anything though Quote Link to comment Share on other sites More sharing options...
Ditchdiggerjcf Posted June 5, 2020 Author Share Posted June 5, 2020 Yep, I have some broken off. They are plastic? Can the part on the firewall be drilled out? Are the push in clips still available? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.