Full Floater Posted January 29, 2016 Share Posted January 29, 2016 The dipstick handle broke off on my EM6-300. Luckily I could fish it out of the dipstick tube...phewww..... This isn't the factory engine so when I ordered a new dipstick from Mack, they ran the trucks serial numbers and I got the wrong dipstick, part #795GB29301P3. They said the numbers of the engine didn't do them any good. The one they sent me had a twist to tighten handle with the rubber seal that expands. Mine had just a plain old hook handle, no seal or anything. It fit into the tube in the picture. Does anyone possibly have part # for an EM6 dipstick?? Quote Link to comment Share on other sites More sharing options...
85snowdog Posted January 29, 2016 Share Posted January 29, 2016 795GB363AP7 you could try . Its 24 5/8 inches long . This is a Mack part # thought, it would have to be crossed over to a volvo # Quote Keith Link to comment Share on other sites More sharing options...
Full Floater Posted January 29, 2016 Author Share Posted January 29, 2016 Oh nice!!!! Thanks so much. I will try that one next week! Quote Link to comment Share on other sites More sharing options...
Village farms Posted May 17, 2016 Share Posted May 17, 2016 Is the dipstick for the 300 ESI with large oil pan same length? Quote Link to comment Share on other sites More sharing options...
Freightrain Posted May 17, 2016 Share Posted May 17, 2016 The tube unscrews from the block with a flare nut so it would not have been a problem getting the broken piece out. 1 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment Share on other sites More sharing options...
Mike Posted May 17, 2016 Share Posted May 17, 2016 Or the PAI Industries part# EDS-8876 Quote Link to comment Share on other sites More sharing options...
39 Baby Mack Posted May 17, 2016 Share Posted May 17, 2016 Is the dipstick for the 300 ESI with large oil pan same length? Should be the same length. The large oil pan just increases the amount of oil to extend the oil change interval. When it's full it's full. Ron Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Village farms Posted May 17, 2016 Share Posted May 17, 2016 Thanks for the info Quote Link to comment Share on other sites More sharing options...
Full Floater Posted May 18, 2016 Author Share Posted May 18, 2016 The 795GB363AP7 works! It hangs up a little bit on the bottom of the dipstick tube, but with a little finessing, it comes out. I can live with that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.