41chevy Posted June 2, 2015 Share Posted June 2, 2015 Dave Natalie at AITM has come out with the conversion. Paulhttp://www.aitruckmodels.com/pages/ck115brockway361.html 1 Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
Vladislav Posted June 2, 2015 Share Posted June 2, 2015 That's good Brockways are modelled.What do you need to convert into Brockway using this kit? Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
41chevy Posted June 2, 2015 Author Share Posted June 2, 2015 That's good Brockways are modelled.What do you need to convert into Brockway using this kitI personally would use an AMT/ ERTL reissued DM600 but the Autocar, Reo will also work. The DM will give you the Camel back, the square fuel tanks and battery boxes. The Autocar gives you the Rockwell AC-6W suspension and the REO gives you walking beam. Paul 1 Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
j hancock Posted June 2, 2015 Share Posted June 2, 2015 Nice model kit for Husky fans.Don't understand the ribs on the hood other than the center hinge. Just don't recall seeing them on 361's. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
41chevy Posted June 3, 2015 Author Share Posted June 3, 2015 Nice model kit for Husky fans.Don't understand the ribs on the hood other than the center hinge. Just don't recall seeing them on 361's.Daves are usually very accurate but being resin they easily sand off. Don't really know the Husky ins and outs. The ribs are there just not a pronounced, After sanding, primer and paint they will be to scale. Here is Tom Millard 361 hood shot.http://imagizer.imageshack.us/v2/1024x768q90/822/o0sn.jpg Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
vision386 Posted June 3, 2015 Share Posted June 3, 2015 Paul.ordered mine this morning! been waiting for a 361 series for years!.............................................Mark 1 Quote Mack Truck literate. Computer illiterate. Link to comment Share on other sites More sharing options...
41chevy Posted June 3, 2015 Author Share Posted June 3, 2015 Are the hood ribs correct? I ended up ordering a few projects from Dave this afternoon. Paul Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
vision386 Posted June 3, 2015 Share Posted June 3, 2015 No Huskiepup by any means,but I have seen 361's both with and without the ribs in the hood,not sure if it was done for added strength?.................................................Mark Quote Mack Truck literate. Computer illiterate. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.