ws721 Posted January 29, 2015 Share Posted January 29, 2015 Still looking for a pair of front directional lights for an "Eastcoast" Cruiseliner. Have found many lights that are close but not the same curve built in where they mount. Quote Remember if it's got a hood it's no good! Link to comment https://www.bigmacktrucks.com/topic/38653-front-directionals-for-cruiseliner/ Share on other sites More sharing options...
Superdog Posted January 29, 2015 Share Posted January 29, 2015 Mikey got these LED ones at Iowa 80 and made angled spacers out of rubber for the,worked perfect. Quote Link to comment https://www.bigmacktrucks.com/topic/38653-front-directionals-for-cruiseliner/#findComment-276570 Share on other sites More sharing options...
ws721 Posted February 1, 2015 Author Share Posted February 1, 2015 On 1/29/2015 at 9:19 PM, Superdog said: Mikey got these LED ones at Iowa 80 and made angled spacers out of rubber for the,worked perfect.005.JPGOk. Thanks. Ill try that. That is one Sexy Truck!!! Quote Remember if it's got a hood it's no good! Link to comment https://www.bigmacktrucks.com/topic/38653-front-directionals-for-cruiseliner/#findComment-276887 Share on other sites More sharing options...
felicello122 Posted February 14, 2015 Share Posted February 14, 2015 Hey Mike you guys going to real buds on the back, nice truck but those back covers got to go, daytons would even look better Quote Link to comment https://www.bigmacktrucks.com/topic/38653-front-directionals-for-cruiseliner/#findComment-278898 Share on other sites More sharing options...
Superdog Posted February 14, 2015 Share Posted February 14, 2015 Oh it has budds on it now. Was trying to hold out for a set of hub pilot hubs so I could use wheels I already had,but got tired of his daily bitching and swapped hubs from my'87 R model . Then had to scrounge up some 22.5 aluminum ball & seat wheels.Poor kid had to run steel budds for almost a month. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/38653-front-directionals-for-cruiseliner/#findComment-278900 Share on other sites More sharing options...
felicello122 Posted February 14, 2015 Share Posted February 14, 2015 Yeah i no what you mean. I have some trailers i need to switch, running stud pilots, i want to change over to hub pilots but i hate taking Hubs off of nice air ride tandems, makes want to put in the whole set up Quote Link to comment https://www.bigmacktrucks.com/topic/38653-front-directionals-for-cruiseliner/#findComment-278905 Share on other sites More sharing options...
j hancock Posted February 14, 2015 Share Posted February 14, 2015 Better to have a Cruiser running down the road on steelies than a Rawhide sitting in the shop with a bad sensor or fawked computer. 2 Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/38653-front-directionals-for-cruiseliner/#findComment-278960 Share on other sites More sharing options...
ws721 Posted February 21, 2015 Author Share Posted February 21, 2015 Chrome don't get you home, but sure gives you pride in your ride Quote Remember if it's got a hood it's no good! Link to comment https://www.bigmacktrucks.com/topic/38653-front-directionals-for-cruiseliner/#findComment-279995 Share on other sites More sharing options...
.thumb.jpg.0449922aae1ecb88ddc2ff334473d201.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.