FFEMT3326 Posted June 3, 2013 Share Posted June 3, 2013 Hey everybody, I am working on replacing the transfer case for my pump on my 1968 CF-611F(7)-1064. The transfer case cracked when a u-joint failed going down the road at 55MPH!!!! The yolk slipped off the drive shaft and hit the brake drum causing excess force on the mount/transfer casing. I have found a new/used case and gears. I need new lining on my shoes for the parking brake but I think I have that covered as well as relining the brake drum.What I am needing is a parts kit or parts for the parking brake (hand brake) that is mounted on the rear of the pump transfer case. Specifically: New return springs (2), adjusting screw spring (1), anchors and maybe the adjustor and cam as well as the cam spring washer. I do not have any parts numbers for any of the springs or smaller items. Any help would be appreciated. The brake is a typical internal expanding bendix type shoe, 12" hand brake. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.