Jump to content

mowerman

BMT VIP
 View Profile  See their activity

  • Posts

    20,191

  • Joined

  • Last visited

  • Days Won

    147

 Content Type 

Everything posted by mowerman

  1. mowerman
    my God that one deserves 50 likes ha ha
  2. mowerman
    you know I used to like that guy until I found out what an arrogant piece of shit he is.. bob
  3. mowerman
    I believe mine has something welded. On the bottom hinge. I’m sure it’s a different part number not a modification. And yes, Joey it’s hard to get in that side. I could see if you’re working on the motor would be a lot easier to take the door off. Bob
  4. mowerman
    It looks like a jeep Wagoneer nice looking ride sorry about your problem the red horse we’re all getting there. Best of luck.Bob
  5. mowerman
    Well there wasn’t much added to this column as I mentioned I saw some of them somewhere around Fowler California they were inside what look like a horse corral. I wasn’t paying a whole lot of attention to them. I was trying to find a wrecking yard that was around there someplace. and that was a long long time ago. There was two or three of them was only about 27 years old and yes, that was way before GPS and cell phones. Good luck. And yes, Paul everybody has disappeared. Bob
  6. mowerman
    I see it what you mean it looks like it’s connected to the door it’s actually bolted to the breather on mine later years, it was connected to the roof. I actually have that picture of the turquoise one in my computer screen saver thanks for that
  7. mowerman
    My passenger door doesn’t open all the way otherwise it (would) hit the breather…
  8. mowerman
    I’m sure he would ever be happy with the 205 and a quad box
  9. mowerman
    Oh my God duck that was brilliant ha ha… bob
  10. mowerman
    They certainly made a big splash as I mentioned 68 to 78. That’s all you would see hauling freight from New Jersey to Boston.
  11. mowerman
    Hey Mack , salesman told me here ago. He wasn’t sure what the deal was but he heard it was visibility. I don’t know either, but that made sense to me.
  12. mowerman
    Won’t open
  13. mowerman
    I got nothing else everybody else did it ha ha thanks for that…. Bob
  14. mowerman
    you know i would give it another shot,,,,because im sure its still there but driving 600 miles round trip doesn't excite me,,,,thanks for your input paul i just wish i would have grabbed it now when i was down there ,,and yes off set cab bonnets out here are extinct ,bob
  15. mowerman
    Same here 330 wake up every Monday or Tuesday after a holiday… bob
  16. mowerman
    I like the idea about the rolling chassis. I just noticed that Meco that’s in genius and it would be a lot easier to transfer the sheet metal. He could probably pick all that up or just two or 3000. Of course it would take a little bit of browsing around and patience. Good luck, bud.
  17. mowerman
    That’s ridiculous. I was just sitting here thinking rather than sledgehammer. Why don’t you weld pull tabs on the dents yank them out with another vehicle and a chain or setup a port a power that’s what I would try. Good luck.
  18. mowerman
    For lots of years, I was always wishing I would’ve been in my 20s in the 50s now that I am old and tired. I think my favorite year would’ve been 1966 grown-up that way I could go down and buy a 64 galaxy which would’ve been two years old And all I would have to do is wash it and drive it OK now I’m going off subject help me out here. Joey have a great day, fellas.
  19. mowerman
    Yes, I believe most of us noticed that after all you do hang around with us old guys to begin with ha ha
  20. mowerman
    As I mentioned, they must’ve had some real crummy drivers in this thing through the years. I’ve never seen a dump truck get beat up so bad but usually back into shit. If nothing else I don’t know what they could’ve been running into so many times to destroy the nose, the way it is, wow wow wow ha ha
  21. mowerman
    Yes, for one thing it’s the right level right where it is I’ll save the last area right where the hinge bolts go for last repair then I will pull it off to repair the underneath section that goes. I’m going to paint the outside and the underneath I’m not going to be that fussy with the underneath section. Just basically make sure I get all the oil and grease removed so that paint sticks. I’ll have to get a friend of mine over here to give me a hand, when the time comes I’ve done so much yardwork around here the past couple of days I’m sitting here drinking coffee, thinking I might spend most of the day in front of the TV
  22. mowerman
    Yes, the green is gorgeous, yellow makes it look like it’s ready to do some road maintenance work. Excellent job bud. Thanks again for letting us know. Looks amazing… bob
  23. mowerman
    Once I get that left corner squared away that’s the worst part Got a couple of honeydews today gotta finish my yardwork. I might go mess around with it a little bit a little later as I mentioned I’ll probably gonna cut the panel right out the headlights and reset it in there
  24. mowerman
    So thanks for the suggestions, fellas but between the long ride down there and back and it still needs work it’s not perfect . Just as well struggle with one It’s just a matter of a lot of time which I don’t really mind. as I mentioned before a very well planned challenge just very time-consuming, not costing me anything at all , just labor but yes, I definitely should’ve bought it at the time and took it home if I would’ve known what I know now hahaha sometimes life is weird..
  25. mowerman
    It’s right on a main highway. I used to pass it all the time going to LA drove by it for 12 years and the guy was a little off and was looking at us really weird because we did not stop at the office first we went over and looked at it first and he said why didn’t you come in the office first I said I was just excited to go look it over and see what kind of shape it was in after we drove home changed my mind about the sale he moves the truck behind the fence so you can’t see it from the road anymore, I think he thought I was gonna drive back and steal it

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...