-
Posts
7,849 -
Joined
-
Last visited
-
Days Won
198
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Joey Mack
-
-
I was thinking that too about the gearing, It may have around a 4:18 or 5:11 rear gear if I looked it up correctly... I may just lift a wheel off the ground, mark it at 12o'clock, then slowly turn it and start counting. It'l probably just be a cool grocery getter... I should be driving it this spring, and yes it will be fun. Jojo
-
Thanks guy's.. I'm not sure what to put on her back.... It's a toy, not a work truck.. Probably just use it to buy groceries...😁 really I thought about a small camper, Heck,,, I don't know... Throw some ideas at me. Of course a nice rack body would be cool.. Jojo
-
Thanks again,,Jojo
-
- Popular Post
- Popular Post
-
How do I find out if she's Canadian? I assume with the vin? I haven' t looked yet... I would also like to find a forum on Internationals... I had a '73 scout back in the late 80's. It was my "woods buggy" up in Maine... Thanks guys. Jojo
-
Thank you.. The inside is just as nice...I'm still learning the proper forums to do that and chat about it too... Jojo
-
she's a work in progress.... The tires are all new. (The glass and seals are in storage), the grille trim is in the cab in a box... but otherwise, she's all there.. I just got it in Oct. and have been too busy to do anything yet. I'm proud to have her. I will get some interior pics and engine pics. She's a time capsule from 1948.. Thanks for youre interest, Jojo
- 2
-
I've been to bunch of big truck shows as a spectator, But 2021 should be better, If I can get my 1948 KB7 together, I'm going to try to attend shows with my own truck, for the first time... Merry Christmas and Happy new year!!! Jojo
- 1
-
-
Hey there, Good call. I posted on the 10th about this, as well.. Check it out.. Jojo
- 1
-
- Popular Post
- Popular Post
Thanks, It's all good... Never thought about judgment.... many people here need youre knowledge...Jojo
- 3
- 1
-
I also did a valve adjustment... It sure was nice to be able to work on that engine, 360 degrees......In the future, I will probably not try to answer questions about MP engines , unless I'm sure of what I'm typing... Thanks again for chiming in.. Jojo
- 1
-
Thank you chiming in... It's been 2+ years since I did a rear gear train repair, and it was on an MP-7. I pulled the engine at the time beacause the cust. wanted rod and main bearings and an engine harness. The chassis was a GU-813 with an allison... anyway thanks again. Jojo
- 1
-
i guess you need to use a dial indicator on no. 1. roll it up to find T.D.C... i cant remember if the dowel on the rear crank hub is a reference point.... ask Vmac3, or FJH. on this forum.. Jojo
- 1
-
it's on the front of the cam shaft
- 1
-
I don't think so. Have you called a Mack dealer with the last "6" of the V.I.N.? just have them look up the springs.... then take the free info, "And run"!... then get what you need at a real shop... Mabey Watts Mack can help you.... They may be one of very few who really care about Macks... Jojo
-
Hey there, I was raised in East Islip, Just curious were you are... We moved out in 1981....anyway, just thinkin about the old days.... Jojo. Merry Christmas!
-
"L" I know what you are saying about "Sleepy" In some case's I changed the "governor" setting from Min-Max.... to" All speed" and it would perk it up some, However< you are at the mercy of the E.C.M...... I drove 427"s and 400's.. 13 spd. and 18 spd. puling over loaded dump trailers... The 400 with 18 spd, (Didn't know the rear gears at that time). did a heck of a lot better, country road hills, mabey, drop 1 gear then split down 1 time was enough to pull the hill and not be a rolling road block. I was a young driver back then, 1999,, But that was my experience, I came out of a 79 R model, 350/ 9speed.. and nothing else... well, it had power steering... Jojo..
- 1
-
Hayseed?? I love the Quote on you're page.. I've been quoting it in my head so i can use it.... Jojo
- 1
-
holy crap..... i didnt even look.. it came up in my page as "new" so to speak...THANKS Hayseed....
- 1
-
paint the splitter grey so onlookers wont get confused..... Just pokin fun,,Jojo
- 1
-
So true, It's a 2018 tranny, change the knob or cut the gate out of it...
- 2
-
Just a thought.. is there a 6-5 code??? I think thats throttle pedal, wasnt there a re-set procedure in V-Mac soft , where you had to press the pedal three times to calibrate it? sometimes I had to do it a few times before it took.. yes I did this when re-programming a new E.C.M., just curious... Jojo
-
- Popular Post
- Popular Post
Your too funny... I'm good, I couldnt agree more with you,, nor could I explain as well as you did... Jojo
- 2
- 1
1948 International KB-7
in Other Truck Makes
Posted
Here are 6 more pics of my Old Truck, The sun was very bright! I tried to get as much detail as possible. She runs... I really like the intermittent wipers...🤣