Jump to content

Moparmike

Bulldog
 View Profile  See their activity

  • Posts

    286

  • Joined

  • Last visited

 Content Type 

Everything posted by Moparmike

  1. Moparmike
    2001 rd just did inframe less then 1000 miles on it..someone replaced the original engine with a 99 e7 427 same engine from factory just different year put new vecm had mack reprogram it to specs truck runs fine then will shut down red x comes on heater blower everything shuts down wait a few minutes starts right back up run 15 min or less shut down no codes what so ever..please help I'm so deep in this truck and not able to run it ..first did it last week ran bout 12hrs no problem then started this Thanks in advance
  2. Moparmike
    Anybody know if I can delete codes are the codes are from my truck
  3. Moparmike
    Ok guys put the vecm my buddy has in truck runs great .does the vecm store codes from the previous truck..soon as I started the truck it has 3 codes 1/3 5/5 7/ 2 ..the lighting volt seems to stay on ..can I have the codes cleared and hopefully the light goes out ..drove it about 80 miles home no problem..thank In advance
  4. Moparmike
    Friend has a vecu but the last number is a 3 instead of 5 will that make a big difference..its a 1999 EU 427 vecu out a ch I think he said
  5. Moparmike
    Yes 2001 rd the computer I need is on the passenger side dash bolted to a cover
  6. Moparmike
    Mackpro I've found a company that has a ecm same numbers same engine would I still need a reflash or it would be hit or miss..also what's the average cost of a reflash on the ecm.. Also hi tech in Texas said they would repair what's wrong on my ecm and send it back its 750.00 Thanks for all the help. I've had this truck 6 mths been in the shop all 6 except for 1 week new inframe and clutch now 30 miles down the road ecm goes out ..
  7. Moparmike
    Are a repair if possible
  8. Moparmike
    2001 ed e7 what numbers are needed off the computer I have to get
  9. Moparmike
    Ok guys update on what I've found.. Took cover off passenger side with computer on it shock white plug light went off truck runs fine..o took computer out cleaned it up put electrical grease on pins reinstalled plugs truck has been running great..thank you all for your help..
  10. Moparmike
    Can someone tell me where all the truck grounds are on a 2000 rd I'd like to check those as well
  11. Moparmike
    Turn in a driveway this morning and hit a bump truck just lost all power only idle to 900 code 6 4 had that happen before took batteries lose no more problems..today nothing still no power I took the gray triangle shape plug apart with the green yellow and black wire pull ecm fuse let truck sit no battery hooked up even took the plugs off the computer on the passenger side of motor nothing..just went out on job ..first day and 1 hr on new job..Smh ..anybody got any ideas to try right here at Christmas is not a good time to be out of work..or even get run off the job..any help is appreciated thank you
  12. Moparmike
    I see there are a few oil plugs on the rear end are they all connected as in does the top 1 feed the bottom are do I need to check and fill each ..didn't want to pull the bottom and fluid goes everywhere..
  13. Moparmike
    Anybody know a good source for a pump ..mack here is 770.00 ..but not in stock ..
  14. Moparmike
    Ok guys I'm really at a lost here ..I've changed out the 2 on the firewall 1 in the cab still no power..anybody know the location of the fuse inside the cab..or relay that controls them..I still have no brake lights..no power on firewall when pressed or even when I start the truck for the first time to let air build..thanks
  15. Moparmike
    Ok thanks ..I replaced the 2 on the firewall does the 1 inside look like the 2 I replaced..airline and 2 wires going to it..
  16. Moparmike
    Ok guys truck had brake lights this morning now tonight none..no power to light switch on firewall..is there a relay in the cab or fuse..got dark on me so I didn't get to check alot of things like I wanna get to..all other lights work just no brake lights..thanks in advance
  17. Moparmike
    What's a good place to get 1 from and what all needs to be replaced..mines has a hair line crack running in it above the grease cap ..can it be welded or just replaced..
  18. Moparmike
    Where can I find the switch at on the truck under the hood on the firewall..
  19. Moparmike
    2000 rd688 if I press the brake pedal enough to start slowing the truck down the brake lights dont come on ..but I I press the pedal harder they work..the work fine when I first start the truck up for the day ..I can be at a stop light sitting on the brake truck still (automatic) no lights push a little more brake lights on..any idea where to start looking..I'm afraid I may get hit..
  20. Moparmike
    11gba4269p6 7y0774 Any help would be appreciated. Oil pump they said 45 days before I could have it..
  21. Moparmike
    1997 mack e7 427 I need cam and lifters kit found a company close but they asking 2700.00 but it has stiff that we don't need ..eup rollers are in great shape but comes in the kit..
  22. Moparmike
    Well found out today that it's a E7 427 in the truck ..got in touch with the guy I got it from..1999 model..so what's the thoughts on this engine guys .looks like new cam and lifters 1 lifter is beat up and the lobe on the cam matches..push rods are good to go rollers on eup are good to go 1 cylinder has a few scratches that I'm not comfortable with also going to put new cam bearings in..
  23. Moparmike
    I had 1 jump out of my e7 2 times come to find out the clip that holds the roller on the bottom was bent after 1400.00 to fix the first time I took it apart the 2nd and the roller fell off in my hand bent the sides in just a little no more problem in over a year..
  24. Moparmike
    Did you get thos from the above or from the vin..just trying to make sure of the engine in the truck..hopefully it's not been changed
  25. Moparmike
    2001 mack rd6886 ..I was told e7 350 but not sure valve cover been charged..now I have to do a cam job so I wanna just make sure I get my right parts and know what I have ..that's the vin. Off the title ..thanks

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...