-
Posts
291 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Coenut
-
-
Usually these guys are great with parts. They take the time to look and research parts and part numbers so this was just odd. They could have been super busy. I'm not worried.
-
-
I have a part number on my sticker that I wanted to replace. I was told it wasn't a Mack number. No dice.
-
I want to make sure I have this correct. Does the shifter boot in an r model mount on top of the floor pan? Or does it secure to the underside of the pan? Does it get secured to the pan then the carpet and finally the ring using different fasteners? So that the boot remains in place if you need to remove the ring and carpet. It probably gets sandwiched to the pan by the ring carpet, but want to be sure. Nobody wants water or a draft.
-
Thank you. Do you remember what the promotion was?
-
-
I'm looking for a roof harness for an early 80s r model with the radio in the dash. Doesn't have to be new just not all cut up.
-
I'm looking for a tan plastic headliner for an r model. My headliner is loaded with cracks and chunks missing.
-
Does anyone know or have the contact info for the fellow at Macungie that has the r model headliners for sale? It's not the person who sets up on the corner with the trailer but a guy in one of the grass rows.
-
-
I'm looking for help. I have marked every air hose during disassembly of truck. Also kept every hose. Except this hose. It's the front lower port on an e6 valve. I don't know where or what it routes to.
-
Did chad sell you this truck?
-
On June 18, 2018 at 9:28 AM, j hancock said:
Looks Great!
Two problems though.
Might have to change your username to "convnut" and you will have to lower the air pres. in the tires to not scuff the stack on the garage door.....
There's just enough drop outside the door for the tips to clear.
-
On June 18, 2018 at 9:07 AM, Timmyb said:
What size is your exhaust stack? I’ll be doing something with my exhaust pretty soon and like the way yours looks. Is it 5 inch?
The stack is 5x72
-
- Popular Post
-
I think there are just 2 pans both are available. Not cheap. Get to fabbing.
- 1
-
I will bolt the brackets up tomorrow and post some pictures. Thank you for all your help.
-
The hood is the same as the second photo. The hood guides are not the issue its the brackets that they bolt to that are way off. I cannot figure out what is wrong. The brackets that came on the donor cab where tight to the cowl. can't find those.
-
I am currently doing some reassembly on an 1980 r700. The cab was toast so I bought a donor cab 1985. Gutted it and put it back to a tan interior 79. Cab doesn't appear to be tweeked. The hood latch support brackets are not even close to fitting correctly. They are off the r7 cab. The passenger side bracket is too long and the holes for the hood latch do not come close. The driver side is close but way to low. Brackets are not bent or tweeked everything is straight. Any ideas.
-
Bought the dash pieces for my r. The original had tabs welded to the structure. The tabs are fastened under the dash support cross bar. The new panel has these 2 holes. Are there more parts to make this work? The bar has no other holes in that area.
Also does anyone know the part number for the hollow bolt like wiper washer fluid nozzles that mount on the cowl.
-
I have a rear window out of an r model. Some small scratches, not bad though. Free
-
- Popular Post
- Popular Post
-
What are the diameters of the tan wheels? Any pics?
-
I bought one from watts.
New r fm f model passenger door
in Parts for Sale
Posted
New door. No box. No holes are drilled for lock cylinder or mirrors. Their is a small ding that a hammer and dolly can take care of. Looking for 300 of best offer. I don't know how to correct sideways pictures.