-
Posts
291 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Coenut
-
-
This is awesome.
- 1
-
If its not cracked. It will clean up very well with Sem soap. Any auto body shop will sell it. Works like magic.
-
Great work. Sure is a labor of love.
-
Your talking about the paint protection? I would think you would not want any wax or ceramic coating on the paint before lettering. But that's me. I would definitely do it on a new truck. But do it yourself not the dealer.
- 1
-
Almost looks like a hydraulic brake line bracket.
- 2
-
Congratulations
-
14 hours ago, j hancock said:
Looks Good! Is the KW about a 1956? Engine?
It's a 53 with a 220 cummins 5x3 trans
-
- Popular Post
- Popular Post
-
On 6/21/2020 at 12:33 PM, Ricky Baccus said:
I have a 1956 LT OR LJ with 22o cummins it will run and drive . It has minimal rust an has all the glass but cracked. call 432 556 3816 in west texas
Ricky thank you for letting me know. Since the post I made a spur of the moment kw purchase.
-
If you screw the thumb screw all the way in it will run. You may have a faulty solenoid. One wire is correct.
-
Good looking truck.
-
Restoration specialties has all of that. Even some with the stainless bead. They are fantastic and will send you samples to verify for before you buy lengths. I used them for the doors on my r model. I have a set of workers that I bought from watts of you need.
- 1
-
I have used Eastwood and did not like it. Por-15 is great, but the prep is key.
-
Where are you located. I'll take the tanks.
-
They also have 6 sided nutserts that don't spin. A little more difficult than just drilling but worth it.
- 1
-
I have the jack you need. It's yours to borrow if you want too.
- 1
-
26 minutes ago, yarnall said:
Nice. I guess you needed a new project since you R700 is done.
I have some odds and ends to finish up on the r700. I like how this looks the way it is. At some point if I decide to dig into this I have some big ambitions.
-
On 3/1/2020 at 1:06 PM, eddeere said:
Looks like a keeper. Was this the one hauled from Seattle ? Tell us more.
Yes. Came out of Redmond
-
- Popular Post
- Popular Post
-
Didnt that belong to someone in this site?
-
It might not be considered a truck stop by as a kid on the way back from New Jersey. If Hot Dog Johnny's was packed we would always stop at the Crossroads diner on route 46. Back lot was always full.
-
Looking for a transport from Seattle area to northeast pa. 53 kW 26 ft long 8 ft high 15500 lbs
-
Yes sir.
-
- Popular Post
- Popular Post
"OtherDog's Steel Coil Chaining School and Brass Pole-a-torium"
in Odds and Ends
Posted
Congratulations. Well deserved.