kscarbel2

I would steer clear of Nissan. Japan Inc has a nationalistic agenda. Saikawa would have made a fine Imperial Army officer.

. . . .

Neil Abt, Fleet Owner / June 4, 2019 Jacobs Vehicle Systems, best known for its “Jake” engine compression brake, is prepping a demonstration truck that will travel the United States this year to allow customers to experience new technologies that can meet tougher emissions regulations while increasing fuel economy. Robb Janak, Jacobs’ director of new technology, said the 58-year-old company has spent much of this decade “repositioning” itself to provide a greater range of transportation solutions. This comes as the company begins rolling out the updated High Power Density engine brake that can offer drivers twice the braking power as the current brake, and provide improved braking capabilities at a lower rpm range. Besides the brake, the demo truck will also feature Active Decompression technology to aid in start-stop applications. The technology is designed to reduce vibrations when the engine is turned off during traffic congestion and in frequent idle situations. It is automatically activated by the engine control unit whenever the engine shuts down or starts up, and works by keeping the engine valves open and the cylinders decompressed. Jacobs said the system also improves start-ups in cold temperatures by enabling the engine to reach its critical compression ignition speeds. Another technology being development but not planned for this year's demo truck is the cylinder deactivation (CDA) system, which cuts emissions by achieving higher exhaust temperatures in the operating cylinders. As a result, large engines are able to have the fuel economy of smaller engines. At the lowest engine loads and with three of six cylinders deactivated, fuel consumption improves by up to 20%. Janak said CDA development is particularly important, because it can offer both lower emissions and higher fuel economy, which were earlier considered to be mutually exclusive. Jacobs is also introducing a two-step variable valve actuation system designed to enhance performance across an engine’s operating range. In a separate announcement earlier in May, Jacobs announced its engine brake model 5783A is now standard equipment on the International A26 engine. Jacobs has supplied a compression release engine brake for International Truck’s 13-liter engine since 2009. The 5783A model comes factory installed on International LT series, International RH series regional haul vehicles, and International HV and HX series vehicles. “We are excited to be a standard feature on the International A26 engine, complementing their technologies for the on-highway, severe duty, and vocational segments,” Steve Ernest, vice president of engineering and business development for Jacobs, said in a statement. Also in May, Jacobs was selected as a recipient of the John Deere Innovation Award for 2018. The award is presented to suppliers who have demonstrated innovation in a product or service they provide to John Deere. .

Fiat Chrysler withdraws Renault merger offer Bloomberg & Reuters / June 5, 2019 PARIS -- Fiat Chrysler withdrew a $35 billion merger offer for France's Renault, abruptly calling off what would have been a landmark deal to create the world's third-biggest automaker. Renault directors failed to reach a verdict on FCA's May 27 merger proposal at a board meeting that ran late Wednesday, the company said. The board was "unable to take a decision due to the request expressed by the representatives of the French state to postpone the vote to a later meeting," Renault said in a statement. Fiat Chrysler pulled the merger offer for Renault after the French automaker’s Japanese partner, Nissan Motor Co., declined to support the deal, The Wall Street Journal reported late Wednesday, citing people familiar with the matter. Nissan’s two representatives on Renault’s board were withholding support as other board members prepared to vote in favor of the $35 billion merger, the paper said. The opposition from Nissan representatives raised doubts about the Japanese automaker's commitment to preserving the alliance if the merger were to proceed, the paper said. "FCA remains firmly convinced of the compelling, transformational rationale of a proposal that has been widely appreciated since it was submitted, the structure and terms of which were carefully balanced to deliver substantial benefits to all parties," the company said in a statement. "However it has become clear that the political conditions in France do not currently exist for such a combination to proceed successfully." The French government, a major Renault shareholder, said Wednesday it wouldn’t approve Fiat Chrysler’s merger proposal without Nissan’s guarantee that Renault’s alliance with Nissan would survive. The French government asked to delay a vote on the merger, prompting Fiat Chrysler to withdraw its merger proposal, The Wall Street Journal said, citing people close to the matter. France was making progress toward a deal that would meet its demands, most of which were granted by Fiat, according to a French official who asked not to be named. However, French officials wanted more time to secure other requests, including that Nissan come on board before a combination move forward. More time was needed to reassure the Japanese side and explain the deal, a source told Bloomberg, adding the French government was surprised that Fiat suddenly withdrew its offer. On Monday, Nissan CEO Hiroto Saikawa said that the proposed merger, if realized, would significantly alter the structure of Renault. “This would require a fundamental review of the existing relationship between Nissan and Renault,” Saikawa said. FCA had earlier reached a tentative agreement with France on the terms of the proposed merger with Renault, two sources told Reuters. French concerns The French state, which owns 15 percent of Renault, had been seeking more influence over the merged company, firmer job guarantees and improved terms for Renault shareholders in return for blessing the $35 billion tie-up. Renault, FCA and the French government all declined to comment earlier on the ongoing board discussions. Analysts had warned of complications with the deal, including Renault's existing alliance with Nissan, the French state's role as Renault's largest shareholder and potential opposition from politicians and workers to any cutbacks. FCA has been locked in talks with Renault and the French state over its bid to create the world's third-biggest carmaker. France had broadly welcomed the deal, on condition it guarantees Renault's domestic blue-collar jobs and plants. Leadership questions The collapse of his proposal to create the world’s third-largest automaker marks a significant retreat for FCA Chairman John Elkann, who leads the company’s founding Agnelli family. After discussions with Renault’s cross-town rival Groupe PSA, Elkann opted for the riskier path, proceeding with an offer for Renault despite the complications of the government’s role and its strained relationship with alliance partner Nissan. The breakdown of talks on a night when a deal appeared to be in hand also leaves Renault Chairman Jean-Dominique Senard in a difficult position -- having sought and failed to bring the French carmaker’s various constituencies into agreement. In addition to the demands from the French state, unions were worried about jobs and Nissan felt burned by the previous regime under deposed alliance Chairman Carlos Ghosn. Renault’s board was poised to approve the deal, with Nissan representatives abstaining, people familiar with the matter told Bloomberg. But France’s representatives asked for more time after officials made clear they wanted to discuss with Japanese authorities before making a decision, they said. Finance minister Bruno Le Maire plans a trip to Japan soon, one of the people told Bloomberg. More time was needed to reassure the Japanese side and explain the deal, a French government official said, asking not to be identified to comply with ground rules. The person added that the government found surprising Fiat’s rushed move to withdraw its offer. A spokesman for the minister didn’t return requests for comment. Criticism of Fiat’s May 27 proposal has gathered steam in recent days. France asked for assurances on jobs, board representation and the role of Senard, 66, who would be CEO of the combined company. Some investors have also voiced doubts. Paris-based activist investment manager CIAM, in a letter to Renault’s board, said the merger with Fiat significantly undervalues Renault and that a 2.5 billion-euro ($2.8 billion) dividend set to go to Fiat Chrysler shareholders should instead be paid to the French company.

Bigland's a good guy. And remember it was Bigland who wanted to bring back Dodge heavy trucks.

Sales chief Bigland files whistleblower suit against FCA Vince Bond Jr. & Michael Wayland, Automotive News / June 5, 2019 Reid Bigland, head of U.S. sales for Fiat Chrysler Automobiles (FCA), filed a whistleblower lawsuit against the automaker Wednesday, claiming he has been a scapegoat for the company's sales practices being probed by federal officials. In the suit, Bigland claims FCA has retaliated against him for cooperating with an Securities and Exchange Commission (SEC) investigation and slashed his pay by about 90 percent, starting in March. FCA executives plan to use his withheld compensation to pay any penalties or settlements reached with the SEC, according to the lawsuit filed in Michigan's Oakland County Circuit Court. The automaker's actions will cost Bigland about $1.8 million, the lawsuit said. Bigland, according to the suit, says he has cooperated with the SEC investigation, testifying "at length" about Fiat Chrysler's U.S. sales reporting practices, which he said long predated his appointment as U.S. sales chief in 2011, according to the lawsuit. "In late 2018, presumably as a way to wrap up their investigation with some result, the SEC suggested to plaintiff that he admit to some wrongdoing as to defendants' monthly sales reporting," Deborah Gordon, Bigland's lawyer, wrote in the lawsuit. "The SEC also suggested a resolution involving some penalty to FCA. Because (Bigland) had not engaged in any wrongdoing, and there was no wrongdoing, he declined to do so." In July 2016, FCA voluntarily changed the way it reports U.S. monthly sales and restated results for the previous five years to reflect the new methodology. The lawsuit says Bigland was excluded from the process of devising a new monthly sales reporting methodology, and was only advised that FCA was considering different methods to adopt. The SEC has been investigating the company's sales reporting practices before the company changed them. Fiat Chrysler said long-term incentive payouts are made at the discretion of a board committee. Bigland's "eligibility for incentive compensation — like that of all corporate officers — is subject to a determination by the board of directors' compensation committee that he has satisfied the applicable company and personal performance conditions," FCA said in a statement. "Mr. Bigland's eligibility for his award remains subject to that determination and completion of a board-level evaluation of issues that are the subject to governmental investigations (as previously disclosed by FCA) in which FCA continues to cooperate." The company said further it would be "inappropriate to comment on ongoing litigation or internal compensation processes." According to Gordon, Bigland remains employed by the company. Bigland’s participation in the SEC investigation, including a “white paper” he wrote detailing his knowledge of the automaker’s sales reporting methodology, has sparked retaliation from the company, Gordon said. She described FCA’s decision to withhold a portion of his compensation as an “unusual situation” because of Bigland’s “excellent” performance that the lawsuit aims to reconcile. “We’re hoping my client will receive the compensation he has earned and then some,” Gordon said Wednesday. “It appears my client is being retaliated against.” .

The Volvo - Shandong Lingong joint venture is as unsuccessful as the one it has with Dongfeng. http://www.sdlg.cn/

In China, car dealers have the right to sell vehicles for whatever price they want......as they should in a free market.

Chinese regulators slap Ford's joint venture with $23.6 million fine CNN Business / June 5, 2019 Hong Kong - Chinese regulators have fined Ford's main joint venture in the country for violating antitrust laws. China's State Administration for Market Regulation slapped Changan Ford with a 162.8 million yuan ($23.6 million) fine for setting minimum resale prices on its cars in the city of Chongqing. The fine amounts to 4% of the company's sales in Chongqing last year. Ford owns 50% of the joint venture, with the rest controlled by its local partner, state-owned carmaker Changan Automobile. Changan Ford's actions deprived downstream dealers of pricing autonomy, restricted competition and damaged the legitimate interests of consumers, the regulator said. Ford said it "respects" the market regulator's decision. "Changan Ford has taken corrective action in its regional sales management together with its dealers," a Ford spokesperson said. "As an ethical company, Ford is committed to complying with local laws and regulations wherever we do business," the spokesperson added. The penalty also comes as Ford is looking to make up lost ground in China. Ford's sales in the country plunged by nearly 40% in 2018 compared to the previous year. The carmaker announced in April that it plans to launch more than 30 new Ford and Lincoln vehicles in China over the next three years as it tries to reverse a decline in sales in the world's biggest auto market. China is Ford's second biggest market after the United States.

The Volvo and Mack brands ranks at the bottom in North America, at 5th and 6th respectively, with low production volumes, and now the bottom is falling out in Volvo's Swedish production. UD is a money loser, Volvo never having turned it around but rather made it worse. Volvo Construction remains a question mark after losing its shirt in China and key shareholders would like to sell it. Volvo never mentions the Dongfeng joint venture because it never panned out for them. Renault Trucks is the only shining star but it can't carry the group.

Dagens Industri / June 5, 2019 The Volvo plant in Tuve reduces production rate after the holiday period. Around 150 temporary and staffing employees getting laid off. Production will decrease from 30 to just over 16 trucks on the evening shift. The reason is said to be the demand trend in Europe. "We adapt the production rate to the order intake that exists," says Claes Eliasson, press officer at Volvo, according to Göteborgs-Posten . In connection with this year's first quarterly report, Volvo reported a clearly lower order intake for trucks than expected. The focus was then directed towards the North American market, but also the European order intake fell, down 17 percent compared with the first quarter last year. However, the vehicle manufacturer repeated the full-year forecast for the total market for heavy trucks. "When we look at normal indicators such as the price of used trucks, the utilization rate of connected vehicles, we still see a high level of activity and that is also why we are repeating our market forecast for 2019, which is somewhat lower than in 2018, but still on a good level. Order intake trending around 300,000 now, ”said CEO Martin Lundstedt then to Di. Earlier this week , RBC highlighted Volvo's heavy exposure to Europe as a reason to wait for purchases in an analysis where the recommendation was set to sector perform. The Canadian major bank was also skeptical of developments in the North American market.

Dagens Industri / June 5, 2019 According to preliminary figure, order intake for heavy trucks in North America amounted to 10,800 units in May. This is a decline of 27 per cent compared with April and a full 70 per cent on an annual basis. The figure indicates the "worst net feed development since July 2016 for heavy trucks". A weak freight market and continued high order backlogs are behind the weak order intake. As recently as Tuesday , RBC Capital flagged that both the European and the North American market for heavy trucks will probably fall this year in connection with the Canadian bank launching the monitoring of Volvo with the recommendation sector perform. In connection with this year's first quarterly report, which was released at the end of April, Volvo reported a substantial decrease in the North American order intake, minus 77 per cent. However, CEO Martin Lundstedt toned down the figure. "The order intake in relation to deliveries was extremely positive for a long time and as we have communicated earlier, we continuously look over the quality of our order book in North America to ensure that we are not on poor orders," he said to Di.

Scania Group Press Release / May 23, 2019 Lots Group, an independent company within Scania, has been awarded a major contract for the transport of sugar cane in Brazil. Operating its own dedicated fleet of Scania G 540s 6×4 trucks, Lots will annually transport 1.5 million tons of sugar cane on behalf of Cocal, a leading Brazilian producer of sugar, ethanol and bioenergy. Cocal manages over 130,000 hectares of sugar cane and operates a fleet of approximately 300 heavy trucks to manage logistics from its fields to refineries. The outsourced transport arrangement to Lots is a first for Cocal as the company seeks new ways of improving its supply chain effectiveness. “This is a highly interesting project for us to further improve our operations,” says Renan Ludwig Paiva, Agriculture Manager at Cocal. “Transport constitutes a major expense in our operation and we need to look at every aspect to make it more efficient.” Lots will set up its control tower solution to manage the optimisation of production flow and dispatching. While Lots manages its own fleet and drivers, the transport will be carried out in close collaboration with Cocal’s other operations to ensure smooth and effective delivery. The contract represents a breakthrough into the agricultural sector for Lots and builds upon its existing operations in Asia, Europe and Latin America. .

Renault Trucks Press Release / May 29, 2019 .

Ford Blog / June 2019 We've all known the classic car collectors, one way or another. Sometimes in an event, sometimes in a documentary… Well, have you ever heard of a truck collector? We didn't hear either until our Uşak dealer told us about Ömer Gül, the operator of Gül Nakliyat. We decided to visit Gül Transport with our friends in the Ford Trucks Marketing team and meet with truck collector Ömer Bey. Dressed in a kernel two dirhams, he warmly welcomed us. And the moment when we first met his truck collection, we were all left open, eyes blazed. Over 30 Ford trucks lined up side by side, all Ford D-1210 models, all of which ended production in 1983. And each truck has a unique story When the cameras were set up, we were not able to make any sense about Ömer Bey's surprise, but we were surprised when he saw that he was not around when he came to plug the microphone. "There is a fear of the camera?" Indeed, exactly ten minutes later Ömer Bey was in front of the cameras; However, it was a nice beard trim at the market, and he brought his unsuitable father from the sick bed and introduced him to us. You can hear the story of the trucks from the mouth of Omer Bey himself. but we also want to talk about the details of the camera behind the camera that affect us. When we were shooting Ömer Bey on one side with his father and his son, all of us had the same thoughts. Ömer Bey was a bridge between the past and the future. And the youngest of our trucks, more than 35 years of age, was the proof of this thesis. If you come across one of the classic trucks in the fleet of Gul Nakliyat, you must also ring the ears of Ömer Bey. .

Ford Trucks International Press Release / May 29, 2019 FIA ETRC 2019 has started with the tour of the "Official Truck" F-MAX in the first stage of the season, Misano, last weekend. .

Ailish McBride sings the song well. .

Scania Group Press Release / May 28, 2019 Traditionally, Ireland’s troubadours have sung about strong men and daring deeds. Nowadays, they celebrate a rumbling legend from Sweden. This is the story of a poetic truck driver, the man with the V8 voice – and “The Scania 164”. In the late 1980s Eddie Crozier is driving haulage all over Europe. Like many other truck drivers, he’s a big Scania fan. Being Irish, Eddie is also musical and a wordsmith. Behind the wheel he hums an idea for a song praising Scania trucks; especially his favourite, the Scania 142. The song is never finished, and Eddie moves to the US. Meanwhile, back in Northern Ireland, a countryman changes career. After years working for bricklayers all over Northern Ireland, hod carrier Joe Moore decides to become a full-time country musician. As he plays pubs and clubs, Joe feels like this is life’s purpose. Soon his distinct deep voice and laid back personality makes him one of the most popular country acts on the local circuit. Introducing: The Scania 164 Then something happens in Södertälje, Sweden. Ever since launching the 14-litre V8 engine in 1969, Scania has dominated the high-output heavy truck segment. But now, in May 2000, a new 16-litre V8 is introduced. The Scania 164 makes a huge impact and becomes a landmark engine, combining exceptional performance and excellent operating economy. Eddie Crozier is back in Europe. The song writing trucker is almost hypnotised by the sound of this new, rumbling Scania 164 V8 truck he is driving. In the Alps, northern Italy and Scandinavia he meets other “Kings of the Road”. Listening to cassettes of American trucker songs, Eddie’s inspiration grows, and a soon-to-be-legendary song takes shape… “…You could hear that wagon coming, with her mighty engine roar, This big machine is strong and mean, drawing 40 tonnes or more, There was no machine could touch her with my shoe down to the floor, As I drove up the motorway in my Scania 164…” Eddie meets Joe Waiting for fish to be loaded in County Cork, Ireland, Eddie is asked for advice by some fishermen what trucks to buy. As Eddie answers the words start flowing, and in the back of his head the final verse of “The Scania 164” song is born… “If you ever think of trucking or buying a wagon big and strong, Have yourself some comfort as you go trucking on, When going to a dealer then let him know the score, That you just want to buy yourself a Scania 164.” A few years later Joe Moore is playing in a bar outside Belfast when Eddie, by now producing Country and Western CDs, walks in. Eddie is enchanted by the singer’s voice: it’s almost like a rumbling V8 engine, he thinks. After the gig, he asks Joe to record an album together with him. This eventually becomes five albums. “The Scania Man” album is by far the most popular, and one of the songs is “The Scania 164.” January 2019 The Theatre Royal in the Scottish town of Dumfries is packed when Joe Moore takes the stage. The audience has come for “The Legends of American Country,” one of Europe’s leading country music tours. On the posters Joe is presented as “Mr Country” and “The man with the deep voice”, but most of the audience know him as “The Scania man”. Joe plays classics by Kris Kristofferson, Kenny Rogers, Don Williams, and Johnny Cash, but soon the audience starts shouting, “sing The Scania 164!” He does, and his fans rejoice. A legendary song Back on the other side of the Irish Sea in Banbridge, Northern Ireland, K. Mackin Transport has grown from one vehicle to a fleet of 25 trucks and 40 trailers in 15 years. The company’s vintage Scania collection is extremely popular at truck shows across Europe. Owners Kevin and Carol Mackin even built their own museum, dedicated to Scania’s V8 trucks. This is where we meet Eddie, who once drove for K. Mackin. “The Scania 164 is my song giving praise to that mighty truck from Scania,” he explains, showing us the many rarities in the Mackins’ ‘V8 Room’. “The trucking community of Northern Ireland is special. Trucking isn’t just a job, it’s a way of life for many people, and their vehicles are their pride and joy. Here, commercial haulage and country music are one.” Many songs mention Scania trucks, such as “The Mighty 143”, “Keep ‘er Lit” and “The Scania Man”. But the most beloved is “The Scania 164”. “For years it has been one of the most requested country songs on radio here in Northern Ireland, and it’s legendary among European truckers,” says Crozier. Backstage with ‘The Scania man’… Backstage, at the Theatre Royal in Dumfries, Joe Moore wipes the sweat from his brow and slowly pulls off his tight cowboy boots. His laidback personality once made him one of the most sought-after acts on the circuit. Throat surgery meant he didn’t sing for several years, but now he’s back, more popular than ever. The audience calls for more. “You know,” he says, “after the surgery and the break I was afraid they had forgotten me, but as soon as I started singing again, the gigs started to pile up. And my voice was even deeper than before.” Nowadays, Joe mainly sings American country music, but the song Eddie wrote still looms large. Yet, he confesses, “The first time I heard the Scania 164 song, I didn’t believe in it. It wasn’t really country to me and it was a little bit too slow. But we worked on it, Eddie and me, and I got hooked.” All is forgiven… In Banbridge, Eddie tells us he is slightly embarrassed by the first verse of his homage to the Scania 164: “I used to drive a Scania Truck, Lord but she could go. She was built up in Sweden; in a place they call Malmo.” “I read somewhere that the company Scania was from Malmö in southern Sweden and I got it a little bit wrong. But I’m sure I’m forgiven…” In Dumfries, Joe and band are playing an encore, before packing up their gear for a long journey north. Tomorrow night they’ll play “The Scania 164” at Corran Halls in Oban. “Even though I never was a truck driver myself, I know a little about this world. Trucking and country music go hand in hand. And the Scania 164 is a magnificent truck, well worth its own song,” says Joe, before hitting the road. .

International Trucks Press Release / June 3, 2019 . .

"Cultural decay and declining standards of behavior" Every "indisputable" murderer apprehended alive would die within 24 hours by the exact same means he/she used on their victims. In these cases with indisputable evidence, there would be no trial. That, I feel, would send shock waves to those who have murderous thinking. I couldn't change them.....but I would put the fear of god into them.