theakerstwo Posted January 11, 2009 Share Posted January 11, 2009 Yes i have and the puller i have here at home is a hand made deal too but i have taken the front mount off and droped the front down some and it helps. I have had them that when you start pulling them and get them up abou 3" they start to leak water out of the block in there to.Then the engine has to come out. Quote glenn akers Link to comment Share on other sites More sharing options...
Mack B Mike Posted July 9, 2011 Author Share Posted July 9, 2011 Hey All, Well finally had some time to work on the Mack, got the 673 all back together. Sleeve pistons, rings, bearings, gaskets paint etc. Still waiting for ex manifold gaskets but couldnt wait to hear it run so bolted manifold on n hit the air valve two tanks of air were used to get it running, fuel system was primed w/hand pump, 50 psi oil pressure @ cold idle.673 first run 07-11.wmv 1 Quote Link to comment Share on other sites More sharing options...
rhasler Posted July 9, 2011 Share Posted July 9, 2011 That sounds and looks awful purty, good job! Quote "Mebbe I'm too ugly and stupid to give up!" Link to comment Share on other sites More sharing options...
gearbox Posted July 9, 2011 Share Posted July 9, 2011 Looks good, sounds strong you should be proud of your work great job Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.