Freightrain Posted Friday at 02:31 PM Share Posted Friday at 02:31 PM Ok, was grinding on my flywheel and after getting the surface flattened I measured height and it is almost .200 deeper then stock spec of 2.797. We didn't take but .050 off so apparently someone ground it way down and didn't take the upper surface down. I bet this clutch slipped like hell from the last rebuild. The book says don't take more then .070. Well it will be .200 down. I know it won't make any difference in my set up and can't see it having any issues with function. Anybody have thoughts? Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/ Share on other sites More sharing options...
mowerman Posted Friday at 02:40 PM Share Posted Friday at 02:40 PM no not if your going accross the bolt holes Quote Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/#findComment-588218 Share on other sites More sharing options...
Popular Post Freightrain Posted Friday at 02:48 PM Author Popular Post Share Posted Friday at 02:48 PM New information online says depth is 2.937. Not 2.797 like in my manual. So the .04 we took off is about right since it is currently 2.975. I'll take the .04 off the top and it will be back around 2.935. 2 1 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/#findComment-588220 Share on other sites More sharing options...
Popular Post Joey Mack Posted Friday at 03:14 PM Popular Post Share Posted Friday at 03:14 PM Run it.... 2 1 Quote Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/#findComment-588226 Share on other sites More sharing options...
Freightrain Posted Saturday at 09:53 PM Author Share Posted Saturday at 09:53 PM Done 2.937 height. 1 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/#findComment-588321 Share on other sites More sharing options...
Joey Mack Posted Saturday at 10:01 PM Share Posted Saturday at 10:01 PM Nice, do you intend on buffing the sides of the dogs, to reduce drag. ? It really looks nice and clean, im not knit pickin'..... Quote Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/#findComment-588323 Share on other sites More sharing options...
Freightrain Posted Saturday at 10:06 PM Author Share Posted Saturday at 10:06 PM It was hot tanked so it is pretty clean overall. I will wire wheel the lugs and detail it a bit before clutch install. Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/#findComment-588324 Share on other sites More sharing options...
Joey Mack Posted Saturday at 10:10 PM Share Posted Saturday at 10:10 PM Nice. You are very good at what you do. Of course the drag car work you do is certainly spot on for the skills needed fornthis 300 build. I wish I had machine shop knowledge like you do... I'd be dangerous... 🍻 Quote Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/#findComment-588325 Share on other sites More sharing options...
Freightrain Posted Saturday at 10:21 PM Author Share Posted Saturday at 10:21 PM "Good"? Good enough for who it's for..... 😆 I have so little patience it makes it hard to be real good. My buddy who is a fabricator is OCD and will take forever to do a simple thing. I'm like F it and just do it. 😲 He is an artist. Me, not so much. 1 Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/#findComment-588328 Share on other sites More sharing options...
Joey Mack Posted Saturday at 10:26 PM Share Posted Saturday at 10:26 PM Ok... I think I get it... 🤔 Quote Link to comment https://www.bigmacktrucks.com/topic/76279-flywheel-question/#findComment-588330 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.