Jump to content

Recommended Posts

Looking for help! This unit runs as a yard truck with PTO for auger/blend system. Normally runs at 1100rpms while pto  is engaged. Problem is it will intermittently stumble/hiccup while running on the high idle, sometimes once or twice other times repeatedly. I cannot run this down the road to a dealer to get it plugged in and no one will come here due to age and software needs, internet etc. Any thoughts on what could be causing this? I have already replaced accelerator pedal with solved the problem of occasionally not staying on high idle, originally thought they were the same problem but apparently not! Appreciate any help...Thanks

Yours doesn't have a check engine light, just the lightning bolt and red shut down light. You can get the lightning bolt to blink any active codes for you by turning cruise off, then hold down (I think it's down?) the set/decel switch until the light starts blinking a 2 digit number... 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...